Go to Kingston.com Homepage INDIA  

FAQs

ISSUE:
FAQ-1		 At what temperatures do HyperX modules operate?

ISSUE:
FAQ-2		 Why does my computer report that the KHX8500D2/XX, KHX9200D2/XX and KHX9600D2/XX modules are DDR2 800?

ISSUE:
FAQ-3		 Can I use HyperX memory modules on my motherboard?

ISSUE:
FAQ-4		 Why won't my HyperX memory reach the advertised memory speed and latency when installed in pairs?

ISSUE:
FAQ-5		 I am interested in buying HyperX memory, but how do I determine the correct modules for my motherboard?

ISSUE:
FAQ-6		 When reviewing the various HyperX parts shown on your website, I found that some part numbers end with an "N", and one of the DDR3 part numbers ends with an "X". What do these letter designations mean, and how do these modules differ in comparison to other, general part numbers?

ISSUE:
KHX-0140010-1		 Why can't I get my HyperX module to run at the advertised speed?

ISSUE:
KHX-0140010-2		 I've installed HyperX memory into my system but when I run a diagnostic program it tells me that the timings are slower than advertised.

ISSUE:
KHX-0140010-3		 I've installed the Kingston HyperX PC3500, PC3700, or PC4000 and by default it runs at 400MHz and not the rated speed?

ISSUE:
KHX-0140010-4		 I've installed Kingston HyperX in my system and I am setting the timings in the BIOS. I see entries like "CAS Latency" and "RAS to CAS Delay", but I don't see "Command Rate". Where can I set this timing?

ISSUE:
KHX-0140010-5		 I have set the timings that you list, but now I see "Burst Length". You do not offer a setting for this. What should I set it to?

ISSUE:
KHX-0140010-6		 I have set my FSB (Front Side Bus) and/or HyperX memory to the correct settings to achieve the rated speed, but now my system will not boot properly.

ISSUE:
KHX-0140010-7		 I've seen your HyperX modules in the store or on the Kingston website and I've noticed that there are several different part numbers. Is there a difference between the part numbers that are in a kit and the parts that sold individually?

ISSUE:
KHX-0140010-8		 How do I access the DRAM timings on my Gigabyte motherboard?

ISSUE:
KGI-062403-1		 What do the memory timings mean? (i.e. 2-3-4-7-1)

ISSUE:
KHX-0140010-9		 I installed HyperX memory and my system fails to boot or it locks up intermittently.



© 2008 Kingston Technology Corporation - All Rights Reserved