KPEX100 Firmware Upgrade Instructions


1. Click "KPEX100_2_09.exe" and select Open or Run to extract the firmware to 
   your computer.
2. Connect the KPEX100/xxx to the computer via the USB cable.
   Note: Do not power-off the KPEX100 during files transfer. If battery power 
   is low, quick-charge the KPEX100 for 10 minutes prior to proceeding with step 3. 
3. Locate the firmware upgrade (default destination is C:\Temp\KPEX100_2_09) 
   previously extracted in step 1.
4. Drag-and-drop the firmware upgrade (gmp-m6.rom) to the first drive letter 
   (i.e. G:\) assigned to the KPEX100 (Root). 
5. Disconnect the KPEX100 from the computer.
6. The firmware upgrade will begin the next time you power-up the KPEX100.