|
SUPPORT HOME
- NETWORKING PRODUCTS
- WARRANTY
- RMA REQUEST
- RMA STATUS (USA only)
HOW TO...
- INSTALL MEMORY
- INSTALL SSDNOW
- USE DATATRAVELER
CONTACT US
|
|
|
Memory Install Guides
These instructions provide general installation and handling information for
144-pin SODIMM memory. These instructions are intended to be used in conjunction
with your model-specific owner's manual.
INSTALLATION PROCEDURE
NOTE: Before touching any electronic components, make sure you are properly grounded. By
wearing a wrist strap (or using some other type of static control device), you can prevent static
electricity stored on your body or clothing from damaging your installation.
-
Always turn off your computer and remove the rechargeable battery pack before installing your Kingston memory.
-
Insert the module into the socket at a slight angle (approximately 30 degrees). Note that the socket
and module are both keyed, which means the module can be installed one way only.
-
To seat the module into the socket, apply firm, even pressure to each end of the module
(see the arrows) until you feel it slip down into the socket. If you are having problems getting the
module to seat properly, try rocking the module up and down slightly, while continuing to apply pressure.
- - When properly seated, the contact fingers on the edge of the module will almost completely disappear inside the socket.
-
With the module properly seated in the socket, rotate the module downward, as indicated in
the illustration. Continue pressing downward until the clips at each end of the socket lock into
position. With most sockets, you will hear a distinctive CLICK, indicating the module is correctly locked
into position.
-
Once the module or modules have been installed, the computer's cover can be reinstalled.
-
Reinstall the rechargeable battery pack and any cables disconnected during the installation process.
-
Turn on the computer and follow the instructions in your computer owner's manual
that describe the steps necessary to allow your computer to recognize the newly installed memory.
KINGSTON’S LEGENDARY QUALITY
Backed by superior design and rigorous testing, Kingston products are engineered
for long-life and continuing value.To further our commitment to quality, all our
products are 100% tested and backed by free technical support.
LIFETIME WARRANTY
Kingston warrants that this product is free from defects in material and workmanship.
Subject to the conditions and limitations set forth below, Kingston will, at its
option, either repair or replace any part of this product that proves defective by
reason of improper workmanship or materials. Repair parts or replacement products
will be provided by Kingston on an exchange basis, and will be either new or
refurbished to be functionally equivalent to new. This warranty does not cover any
damage to this product that results from accident, abuse, misuse, natural or personal
disaster, or any unauthorized disassembly, repair or modification.
WARRANTY CLAIM REQUIREMENTS
To obtain warranty service, return the defective product, freight prepaid and insured,
to your local authorized Kingston dealer or distributor, or to the Kingston factory
service center located at 17600 Newhope Street, Fountain Valley, California 92708,
U.S.A. You must include the product serial number (if applicable) and a detailed
description of the problem you are experiencing.You must also include proof of the
date of original retail purchase as evidence that the product is within the applicable
warranty period. If you return the product directly to the Kingston factory, you must
first obtain a Return Material Authorization ("RMA") number by calling Kingston
Customer Service at (800) 435-0640, and include the RMA number prominently displayed
on the outside of your package. Products must be properly packaged to prevent damage
in transit.
TECHNICAL SUPPORT
Kingston provides free technical support. If you experience any difficulty during
the installation or subsequent use of a Kingston product, please contact Kingston’s
Technical Support department prior to servicing your system.
This warranty covers only repair or replacement of defective Kingston products, as
provided above. Kingston is not liable for, and does not cover under warranty, any
costs associated with servicing and/or the installation of Kingston products.
DISCLAIMERS
The foregoing is the complete warranty for Kingston products and supersedes all other
warranties and representations, whether oral or written. Except as expressly set forth
above, no other warranties are made with respect to Kingston products and Kingston
expressly disclaims all warranties not stated herein, including, to the extent
permitted by applicable law, any implied warranty of merchantability or fitness
for a particular purpose. In no event will Kingston be liable to the purchaser, or
to any user of the Kingston product, for any damages, expenses, lost revenues, lost
savings, lost profits, or any other incidental or consequential damages arising from
the purchase, use or inability to use the Kingston product, even if Kingston has
been advised of the possibility of such damages.
|
|
