Support

VIDEO VAULT
KdT2t5416WA.png

Using the DataTraveler 6000 USB Flash Drive

More video

Frequently Asked Questions
Featured Questions
No. The data on the drive cannot be recovered. Even if you create a new password, the data on the drive is erased and a new encryption key is created. Also, the number of failed password attempts cannot be increased. Unless you can provide a password the drive will accept, the data on the drive will be lost.

FAQ: KDT-111714-PRV-05

This is due to a power limitation. Though some USB devices may work fine in these USB ports, 2.0 USB High Speed devices seem to require more power. In order to resolve this issue, you will need to insert the DataTraveler directly into one of the main USB ports. These USB ports are usually located in the back of the tower. If these ports are difficult to access we recommend a 3ft USB extension cable.

FAQ: KDT-010611-GEN-09

This DataTraveler requires two consecutive drive letters AFTER the last physical disk that appears before the ‘gap’ in drive letter assignments (see figure below). This does NOT pertain to network shares because they are specific to user-profiles and not the system hardware profile itself, thus appearing available to the OS.

What this means is, Windows may assign the DataTraveler a drive letter that’s already in use by a network share or Universal Naming Convention (UNC) path, causing a drive letter conflict.If this happens, please consult your administrator or help desk department on changing drive letter assignments in Windows Disk Management (administrator privileges required.)

In this example, the DataTraveler uses drive F:, which is the first available drive letter after drive E: (the last physical disk before the drive letter gap.)Because letter G: is a network share and not part of the hardware profile, the DataTraveler may attempt to use it as its second drive letter, causing a conflict.

If there are no network shares on your system and the DataTraveler still won’t load, it is possible that a card reader, removable disk, or other previously-installed device is holding on to a drive-letter assignment and still causing a conflict.

Please note that Drive Letter Management, or DLM, has improved significantly in Windows XP SP3, Vista, and 7, so you may not come across this issue, but if you are unable to resolve the conflict, please contact Kingston’s Technical Support Department for further assistance.

FAQ: KDT-011411-PRV-02

We've seen this when security software blocks the users ability to write to CD/DVD's. Run gpedit.mscand go to Windows settings>security setting>local policies>security options and make sure Devices: Restrict CD-ROM access to locally logged-on user only is set to disabled.

Also, too many entries for mounted devices in older computers can cause this problem. When all the entries cleared the drive should work again. To do this, go to start and type regedit in the search field. Make sure to back up your registry before making any changes. Here are instructions for backing up your registry.

http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

In the directory list on the left side, find the entry HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices. Remove all entries except for default (it won't let you anyway).

You can also look at Device Manager when the Data Traveler is connected to see if the drive comes up with any yellow exclamation marks. Uninstalling the device with the exclamation mark and scanning for new hardware sometimes will work as well. You may want to try this even if you do not see any yellow exclamation marks for this device. You will need to run the uninstall as the Admin to be able to perform this while logged-in as a non-Admin.

Also check the setting for your security programs (Norton, Symantec, etc).

FAQ: KDT-121311-PRV-03

This drive is designed to be 100% encrypted. The security is build into the drive and cannot be removed or disabled.

FAQ: KDT-012914-PRV-04
More Questions

To transfer files larger than 4GB, the DataTraveler must have a NTFS or exFAT file system. Unfortunately, the FAT32 file system is not capable of handling a single file larger than 4GB (to be exact, one byte less than 4GB). Follow the steps below to format the DataTraveler with an NTFS File system:

Warning, all data on the DataTraveler will be lost! Please backup the data on the DataTraveler before proceeding.

  1. Locate My Computer (Computer in Vista and 7). Right-click on the Kingston drive and select Format.
  2. Select NTFS or exFAT from the file system drop-down list.
  3. Select Quick Format as the Format option and click Start.
    Note: If NTFS is not an available option, close the Format window and follow steps 4-9.
  4. Right-click My Computer (Computer in Vista) and select Properties.
  5. Select the Hardware tab and click Device Manager.
  6. Expand Disk drives and right-click on the Kingston drive. Select Properties.
  7. Click on the Policies tab and select "Optimize for performance."
  8. Click OK.
  9. Repeat steps 1-3.

Be aware MacOS 10.6.5 will support full read and write access to exFAT formatted drives. MacOS still has read only access to NTFS formatted drives.

Some devices (MP3 players, digital photo frames, etc) will not read NTFS or exFAT file systems.

Also Windows XP and Vista will require an update in order to access exFAT.

FAQ: KDT-010611-GEN-05

This may be due to a power setting for your USB ports. Here are the steps to change this setting:

  1. Click Start -> Control Panel.
  2. Click Performance and Maintenance link.
  3. Click System control panel link.
  4. Click Hardware tab.
  5. Click Device Manager button.
  6. Click the + in front of Universal Serial Bus controllers to expand this hardware category.
  7. Right-click the USB Root Hub and select Properties.
  8. Click the Power Management tab and uncheck the box next to "Allow the computer to turn off this device to save power".
  9. Repeat steps 7 and 8 for each additional USB Root Hub listed.
  10. Reboot the computer.
FAQ: KDT-010611-GEN-13

To resolve, make sure to insert the drive directly into the USB ports located on the computer. The USB ports found on the keyboard and some hubs may not supply sufficient power to properly operate the Kingston DataTraveler. Also, go to Finder>Preferences>Sidebar to ensure CD, DVD and iPod and External Disks are checked.

FAQ: KDT-010611-GEN-18

Windows assigns new drives to the next available physical drive. It will sometimes take the same drive letter as a network drive for this reason. This is a common problem with removable storage devices.

To resolve this go to control panel>administrative tools>computer management. Note the drives on the right window pane. See if the Kingston (x) is recognized. (x) denotes the drive letter that Windows assigned for the Data Traveler.

If the DataTraveler is using the same drive letter as one of the other drives, right click the Kingston Drive letter and click on "Change Drive letter and Paths".

On the next dialog box click on the "Change" button and assign a drive letter that is not currently being used.

Note: Do not manually change drive letters if you have a "Privacy" Data traveler that assigns two drive letters for the device.

FAQ: KDT-010611-GEN-03

In Macs you first have to empty out the trash can in order to regain the space back. You may have to re-plug the drive back in after emptying out the trash.

Should this not work then a complete format of the device should be done. Please follow these instructions for formatting your Kingston device.

WARNING: Formatting will erase all your data so please make sure you have a copy before proceeding.

  1. Go to Go > Applications > Utilities and Open Disk Utility.
  2. Choose your drive from the left panel and then click Erase on the right.
  3. Select a Volume Format.Choosing MS-DOS File System will allow the drive to work on the Mac and Windows operating systems. If used only in a Mac then select Mac OS Extended as the Volume Format.
  4. Click Erase.
FAQ: KDT-010611-GEN-04

This happens if the DataTraveler has been formatted with Microsoft Windows NTFS. To resolve, format the DataTraveler with Mac OS X using MS-DOS File System.

To format the DataTraveler with Mac OS 10.3.X, do the following:

  1. Click on the "GO" option on the menu bar.
  2. Double-click on "Utilities" (If you do not see Utilities, double-click on Applications and then double-click on the Utilities folder.)
  3. Double-click on the "Disk Utility" icon.
  4. On the Disk Utility Dialog box, click once on the Kingston DataTraveler active partition.
    Note: There will be two listings for the Data Traveler, the first one is the active partition and the second is the volume label.
  5. Click the erase tab located on the right side of the screen.
  6. Using the Volume Format drop-down, select "MS-DOS File System" from the list.
  7. Click Erase.

Be aware MacOS 10.6.5 will support full read and write access to exFAT formatted drives. So formatting the drive using exFAT file system may also resolve this problem. MacOS still has read only access to NTFS formatted drives.

Some devices (MP3 players, digital photo frames, etc) will not read NTFS or exFAT file systems.

Also Windows XP and Vista will require an update in order to access exFAT.

For additional assistance using the Data Traveler, please visit http://www.kingston.com/support/howtodt/default.asp to view the DataTraveler "How To" videos.

FAQ: KDT-010611-GEN-08

After formatting the DataTraveler in Mac OS X, the following symptoms may apply:

  • The drive is not readable in Windows XP.
  • While trying to format the drive in Windows, only 2GB is formatted. Additionally, two partitions are created.
  • After adding data files onto the drive via Mac, Windows cannot see the data.

This is most likely a result of using the GUID partition table, which is the default partition table for Intel-based Macs. The GUID partition table is only supported in Windows Vista. Windows 7 and Windows XP do not support this file system. To resolve, you must erase the drive via Mac OS X with the appropriate options selected. Follow the steps below to erase your drive properly with Mac OS X.

  • Access Disk Utility
  • Highlight the disk and select the "Partition" tab
  • Set the volume scheme to "1 Partition"
  • Change the format to "MS-DOS (FAT)"
  • Click the "Options" button near the bottom of the screen and select the "Master Boot Record" partition table.
  • Click Apply to save the changes and reformat the drive

After the format is complete, verify that the disk is now using MBR by looking at the "partition map scheme" in the lower right corner of the Disk Utility window. It should now display "Master Boot Record."

FAQ: KDT-010611-GEN-16

Follow the steps below to format the DataTraveler with an NTFS File system using Windows PC.

Note: Admin rights are required.

  1. Remove all other external flash devices from your computer.
  2. Right-click My Computer (Computer in Vista) and select Manage.
    Note: If User Account Control is enabled in Windows Vista, an alert will display. Click Continue to proceed.
  3. From the right side window, double-click Storage and then double-click Disk Management.
  4. From the right side window, right-click the Kingston (Removable) drive and select Format.
    Note: You may receive a warning: "This is the active partition on this disk. All data on the partition will be lost. Are you sure you want to format this partition?" Click Yes to proceed.
  5. In the Format window, select "NTFS" file system and a check the box next to "Perform a quick format." Click OK.
  6. Click OK on the Format warning window.

The Kingston (Removable) drive window will display "Formatting" while the drive is being formatted. Once the format is complete, the status will revert to "Healthy."

FAQ: KDT-010611-GEN-17

ReadyBoost is a Windows Vista and Windows 7 feature which has the ability to utilize USB flash drive storage space to improve system performance. The DataTraveler does not support Windows ReadyBoost.

FAQ: KDT-010611-GEN-11

If you have determined you were sold a counterfeit product, please visit our counterfeit reporting site at http://legacy.kingston.com/company/counterfeit.asp.

To determine if your product is counterfeit, please contact our technical support department at (800)435-0640 or fill out the Technical Support form on this page.

The only way to guarantee the authenticity of a Kingston product is to purchase it via a reputable partner. For a listing of some of these, please visit, http://www.kingston.com/us/wheretobuy/

FAQ: KGF-011411-GEN-01

Although it is possible to boot from the DataTraveler, it is not a feature Kingston supports.These drives are intended as storage devices.

FAQ: KTD-082913-GEN-27
Live Chat

Monday-Friday 6 a.m.-6 p.m. PST

Call Technical Support

1(800)435-0640

Monday-Friday 6 a.m.-6 p.m. PST

Back To Top