ASRock - Z590 Extreme Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    128 GB

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD - M.2 SATA

    PCIe 4.0

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 10th/11th Gen Intel Z590

    Intel Core i5 10th/11th Gen Intel Z590

    Intel Core i7 10th/11th Gen Intel Z590

    Intel Core i9 10th/11th Gen Intel Z590

Important Configuration Notes

  • MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode.
  • Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed.

Kingston FURY Configuration Notes

  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Speeds over 4000MT/s may require 11th Gen processor to achieve. Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • RGB lighting customization is supported with Kingston's FURY CTRL application, downloadable from the Microsoft Store.

Compatible Upgrades For Your System

Overclocking pushes the stable industry standard specifications of memory (speed, latencies, voltage) to achieve higher performance. While generally safe and supported by Intel, AMD, and the motherboard/system manufacturers, overclocking is done at your own risk. System stability may be compromised by some speeds and configurations. The FURY parts listed are based on motherboard manufacturer testing (QVLs) and Kingston internal testing, however some systems may require premium components (high-end processor models, motherboards, power supplies, and water cooling) to achieve stable overclocking, particularly at extreme speeds.

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).