ASRock - Z790 PG-ITX/TB4 Motherboard

configurator results memory

  • Estándar

    0 GB (Removable)

  • Máximo

    96 GB

  • Arquitectura del bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2280 (Heat Sink)

  • 2 Socket(s)

  • Intel Core i3 12th/13th Gen Intel Z790

    Intel Core i5 12th/13th/14th Gen Intel Z790

    Intel Core i7 12th/13th/14th Gen Intel Z790

    Intel Core i9 12th/13th/14th Gen Intel Z790

Notas importantes sobre la configuración

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit density DRAM.
  • Industry standard “ValueRAM” DIMMs are built to JEDEC specifications and will operate at the standard speed allowed by the processor. Based on processor rules for module ranks and configurations they will safely clock down to lower speeds. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • 1PDC (1 DIMM per Channel)
  • 1R (Single Rank)
  • 2R (Dual rank)
  • Per Intel, 14th Gen processors support the following standard speeds by rank and configuration:
  • 1DPC 1R Up to 5600MT/s
  • 1DPC 2R Up to 5600MT/s
  • Per Intel, 13th Gen processors support the following standard speeds by rank and configuration:
  • 1DPC 1R Up to 5600MT/s
  • 1DPC 2R Up to 5200MT/s

Notas sobre la configuración de Kingston Fury

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Per ASRock, with an Intel 12th/13th Gen processors installed, the following overclocked memory speeds are supported:
  • 1DPC 1R Up to 6800+ MT/s (OC)
  • 1DPC 2R Up to 6000+ MT/s (OC)
  • Performance may increase with BIOS updates.

Actualizaciones compatibles para su sistema

La sobreaceleración (overclocking) traspasa las especificaciones estándar estables del sector de las memorias (velocidad, latencias, tensión) para posibilitar un mejor rendimiento. Aunque en general la sobreaceleración es segura y admitida por Intel, AMD y fabricantes de sistemas/placas base, es una opción por su propio riesgo. Ciertas velocidades y configuraciones pueden comprometer la velocidad del sistema. Las piezas de FURY están basadas en pruebas de los fabricantes de placas base (QVL) y pruebas internas de Kingston. Sin embargo, algunos sistemas pueden requerir componentes de mayor nivel (modelos de procesadores, placas base, sistemas de alimentación y refrigeración de alta calidad) para conseguir una sobreaceleración estable, en especial a velocidades extremas.

Kingston FURY Renegade con disipador térmico (SFYRSK/xxxG, SFYRDK/xxxG) encajará en la mayoría de los sistemas compatibles con su tamaño (~80mm x 23.67mm x 10.5mm). Esto incluye diversas placas base, ordenadores de sobremesa y para juegos PC, y PlayStation 5. Si no está seguro sobre si encajará, consulte el manual de asistencia técnica del fabricante de su sistema, o bien contacte con el servicio de Asistencia técnica de Kingston.
Nota: algunos sistemas de factor de forma pequeño, como Intel® NUC, no tienen espacio físico para la altura del disipador térmico. En tales circunstancias, sugerimos FURY Renegade sin disipador térmico (SFYRS/xxxG, SFYRD/xxxG).