Gigabyte - Z690 GAMING X Motherboard

configurator results memory

  • Standar

    0 GB (Removable)

  • Maksimum

    128 GB

  • Arsitektur Bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th Gen Intel Z690

    Intel Core i5 12th Gen Intel Z690

    Intel Core i7 12th Gen Intel Z690

    Intel Core i9 12th Gen Intel Z690

Catatan Konfigurasi Penting

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds. Per Gigabyte, in configurations of 2DPC (2 DIMMs per Channel, 4 total DIMMs installed), standard JEDEC spec (ValueRAM) memory (non-XMP) may clock down to the following speeds:
  • DDR5-4800 speed drops down to 4400MT/s when 2 DIMMs of the same channel are populated.
  • DDR5-4800 speed drops down to 4000MT/s when 4 DIMMs are populated (1Rx8 /1Rx16).
  • DDR5-4800 speed drops down to 3600MT/s when 4 DIMMs are populated (2Rx8).

Catatan Konfigurasi Kingston FURY

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.

Upgrade yang Kompatibel untuk Sistem Anda

Overclocking mendorong spesifikasi standar industri yang stabil pada memori (kecepatan, latensi, voltase) untuk mencapai performa lebih baik. Meskipun secara umum aman serta didukung oleh Intel, AMD, dan produsen motherboard/sistem, risiko overclocking menjadi tanggung jawab Anda sepenuhnya. Stabilitas sistem dapat terganggu oleh adanya penambahan kecepatan dan konfigurasi. Komponen FURY yang tercantum didasarkan pada pengujian produsen motherboard (QVL) dan pengujian internal Kingston. Meskipun demikian, beberapa sistem mungkin memerlukan komponen premium (model prosesor, motherboard, catu daya, dan pendinginan air kelas atas) guna mencapai overclocking yang stabil, terutama untuk kecepatan yang tinggi.

Kingston FURY Renegade dengan Pembuang panas (SFYRSK/xxxG, SFYRDK/xxxG) akan cocok pada sebagian besar sistem yang dapat mengakomodasi ukurannya (~80mm x 23.67mm x 10.5mm). Sistem tersebut termasuk berbagai motherboard, desktop, PC gaming, dan PlayStation 5. Jika Anda tidak yakin akan kecocokan sistem Anda, harap tinjau panduan dukungan dari produsen sistem Anda, atau hubungi Dukungan Teknis Kingston.
Catatan: Beberapa sistem dengan faktor bentuk yang kecil seperti Intel® NUC, secara fisik tidak dapat mengakomodasi tinggi pembuang panas tersebut. Dalam keadaan seperti ini, kami menganjurkan FURY Renegade tanpa pembuang panas (SFYRS/xxxG, SFYRD/xxxG).