HP/HPE - Synergy 480 Gen10 (G10) Compute Module

configurator results memory

  • Standard

    8 GB (Removable)

  • Massimo

    1,5 TB Reg ECC RDIMMs

    3 TB LRDIMMs

Upgrade con memorie compatibili

  • 8GB Standard:

    Processor 1 (installed):

    8 GB

  • Processor 2 (optional):

  • Architettura bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD - SATA 3.5-inch

Upgrade con storage compatibili

  • 12 Socket(s) per CPU

    24 Socket(s) using two CPUs

  • Intel Xeon Scalable 1st/2nd Gen Intel C62x Series

871940-xxx; 871941-xxx; 871942-xxx; 871943-xxx; 871945-xxx; 871946-xxx

Note importanti sulla configurazione

  • Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
  • This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
  • If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
  • White DIMM slots designate the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.

Upgrade compatibili per i vostri sistemi

Risultati
Velocità{{Footnote.A65242}}
Tipo DIMM
Capacità modulo
Tipo rank
DRAM Width
Densità DRAM
Filtro Filters Applied
Risultati
Gamma di capacità
Filtro Filters Applied
* Kit: la garanzia viene invalidata e i resi non vengono accettati nel caso in cui i componenti dei kit vengano venduti o utilizzati come parti separate.