All Kingston SSDs incorporate End-to-End Data Protection, which protects customer data as soon as it is transferred by the host system to the SSD, and then back from the SSD to the host computer.
All SSDs contain controllers that allow them to communicate with the host system to which they are attached. Data written to or read from the SSD occurs via this SSD controller, regardless of SSD form factor (2.5-inch, Add-In-Card, M.2, etc.) or protocol used (for example, SATA or NVMe).
There are numerous SSD controller designs currently available. While some SSD controllers incorporate a built-in cache (typically SRAM) as part of the controller design, others may use a discrete DRAM chip (or chips) to temporarily store internal Flash mapping tables and the user data that is being processed. Some controller designs do not use discrete DRAM, but instead use a portion of the NAND Flash as storage for their mapping tables.
SSDs rely on NAND Flash chips for data storage. NAND chips are non-volatile storage devices that store data even after they are powered off. When the SSD controller needs to store or retrieve data, it has to write to or read from the NAND Flash chips.
SSDs must maintain data integrity as data moves from the host PC to the NAND storage via the SSD controller. The data transfers from the host to the SSD are often referred to as “data in flight” or “data in transit” before they are actually written to the NAND Flash storage. SSD controllers incorporate Error Correction technology (called ECC for Error Correction Code) to detect and correct the vast majority of errors that can affect data along this trajectory. Flash memory chips incorporate additional error correction information along with every block of data that is written; this information allows the SSD controller to simultaneously correct many errors when reading a data block. NAND Flash memory, like hard disk drives, encounters bit errors during normal operation and corrects such errors on the fly using its ECC data.
In rare cases, data errors in a block that is being read cannot be corrected; the SSD Controller recognises this occurrence as an Uncorrectable ECC Error (UECC) and reports the error to the host computer. SSDs are designed to be extremely reliable. For Client SSDs, UECCs are typically rated as one in 10
-15 bits read, and enterprise SSDs are rated as one in 10-16 bits read. Using the JEDEC JEDS218A and JESD219 UBER requirement for enterprise versus client SSDs, an enterprise class SSD is expected to experience only 1 unrecoverable bit error at a ratio of 1 bit error for every 10 quadrillion bits (~1.11 petabytes) compared to a client SSD at 1 bit error for every 1 quadrillion bits (~0.11 petabytes) read.
Kingston SSDs also incorporate Spare Blocks in the NAND Flash devices. These storage areas are usually in the Over-Provisioned (OP) space of a drive, and are not user-accessible. If a NAND device has excessive errors in a data block, then that block will be marked as a Bad Block, retired and one of the spare blocks will be rotated into service. During this process, the data will be corrected if needed using ECC. The use of Spare Blocks extends the useful life and endurance of SSD drives.
©2021 Kingston Technology Europe Co LLP und Kingston Digital Europe Co LLP, Kingston Court, Brooklands Close, Sunbury-on-Thames, Middlesex, TW16 7EP, England. All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
