Pertanyaan yang Sering Diajukan

Pertanyaan Utama

There is compatibility issue with the older version of this reader and this version of MacOS. In most cases, updating the firmware resolves the problem.

Be aware that the firmware update will only work in a Windows computer. It cannot run in MacOS. If you are unable to update the reader or the update does not resolve the problem, please contact technical support for assistance.

FAQ: KFR-111913-HS3-05

This reader does support SDXC cards. Be aware that most SDXC cards will use the exFAT file system. Most devices that accept SDXC cards, like digital cameras, read this file system. Therefore you should make sure the operating system on your computer will support exFAT or can be updated to support exFAT.

FAQ: KFR-072611-HS3-01

Windows assigns new drive letters to the next available physical drive. It will sometimes take the same drive letter as a network drive for this reason. This is a common problem with removable storage devices. Please use the following procedure to resolve this problem.

  1. With the reader plugged into a USB port, right-click on “Computer” (or “My Computer”) located on your desktop or under the Start menu on the Task Bar and select “Manage”.
  2. Select Disk Management on the left window pane.
  3. Locate the reader on the right window pane.
  4. Right-click on the drive and select “Change Drive Letter and Paths” and assign it a new drive letter that is not being used by a mapped network drive.
  5. Go back to “Computer” and open it to see if the reader is assigned the drive letter you chose.
FAQ: KFR-011411-GEN-01

This is due to a power limitation. Though some USB devices may work fine in these USB ports, USB 2.0 High Speed devices usually require more power. In order to resolve this issue, you will need to insert the reader directly into one of the main USB ports. These USB ports are usually located in the back of the tower.

FAQ: KFR-011411-GEN-02

Because the FCR-HS3 is based on a new design, the 19-in-1 icon utility is not compatible and it may cause the FCR-HS3 to not function properly. You should uninstall the 19-1 icon utility before using the FCR-HS3 reader.

FAQ: KFR-090111-HS3-03

There is a firmware update which resolves Windows©8 and Mac OS compatibility problems.

Here is a link to the firmware update page:

Be aware that the update software will only work in Windows. It will not work in Mac OS.

Hubungi Dukungan Teknis

Ada pertanyaan tentang produk Kingston yang sudah Anda miliki? Tanyakan ke ahli Kingston.

Pertanyaan yang Sering Diajukan

Hubungi Dukungan Teknis

Ada pertanyaan tentang produk Kingston yang sudah Anda miliki? Tanyakan ke ahli Kingston.