HP/HPE - ProLiant DL160 Gen8 (G8)

configurator results memory

Standard

16 GB (Removable)

32 GB (Removable)
Maximal

128 GB ECC UDIMMs

384 GB ECC RDIMMs

768 GB LRDIMMs

16GB Standard:

Processor 1 (installed):

4 GB

4 GB

4 GB

4 GB
Processor 2 (optional):
32GB Standard:

Processor 1 (installed):

8 GB

8 GB

8 GB

8 GB
Processor 2 (optional):

Busarchitektur

PCI-X

PCI Express

SSD - SATA 2.5-inch 9.5mm

Kompatible Speichererweiterungen

24 Socket(s) using two processors

12 Socket(s) per processor

Intel Xeon E5-2600 Series Intel C600 Series

662082-001; 662083-001; 662084-001

This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
No more than two ECC UDIMMs or Quad Rank RDIMMs may be installed per channel (2DPC). It is recommended to install modules in first and third banks, leaving second bank (sockets 2, 5, 8, and 11) open. 1.35V LV RDIMMs up to 2DPC. Adding additional memory of 3DPC will raise voltage to 1.5V.

Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, 1333MHz or 1066MHz. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
1866MHz and 1600MHz Low Voltage memory requires E5-2600 v2 series processors.
Xeon E5-2600 v2 series processors require HP System ROM revision 09/08/2013 or newer. Revision 09/18/2013 or newer is required if using LRDIMMs.

* Kits: Bei separatem Verkauf oder separater Verwendung wird die Garantie ungültig und Rücksendungen werden nicht akzeptiert.