Temukan dukungan untuk Produk Kingston Anda

Sebagian besar memori Kingston FURY/HyperX menggunakan profil XMP/EXPO untuk melakukan overclocking. Berbagai modul ini dikirim dari pabriknya dengan nilai standar JEDEC. Beberapa sistem tidak mendukung kecepatan dan latensi overclocking pada instalasi pertama. Jadi, agar setiap pelanggan mendapatkan pengalaman terbaik, Kingston menyetel modul dengan nilai standar JEDEC sehingga memberikan pilihan kepada pengguna untuk melakukan overclocking menggunakan profil XMP/EXPO jika sistemnya mendukung profil itu. Profil XMP/EXPO kemudian dapat diaktifkan di dalam BIOS sistem.

Modul Plug-N-Play (PnP) yang menjadi fitur dalam lini produk FURY Beast dan Impact dikirim dari pabriknya dengan memprogram kecepatan overclocking dan latensi diiklankan sebagai nilai bawaan. Jika sistem tidak dapat bekerja pada pengaturan overclocking PnP, sistem akan kembali ke pengaturan waktu standar JEDEC secara bawaan. FURY Beast dan Impact, yang menggunakan metode overclocking PnP, juga berfitur profil XMP yang menyamai kecepatan dan latensi diiklankan. Fitur ini dapat digunakan untuk memaksa sistem melakukan overclocking memori jika overclocking tidak terjadi secara otomatis.

FAQ: KTM-030615-HYX-03

Some of the flash storage device's listed capacity is used for formatting and other functions and thus is not available for data storage, therefore you will not see the full capacity.

When a flash storage device is manufactured, steps are taken to ensure that the device operates reliably and permits the host device (computer, digital camera, PDA, etc.) to access the memory cells; i.e., to store and retrieve data on the flash storage device. These steps, loosely called "formatting," utilize some of the memory cells within the device and thus reduce the capacity available for data storage by the end-user.

Formatting includes the following operations:

1. Testing each memory cell in the flash storage device.
2. Identifying all defective cells and taking steps to ensure that no data will be written to or read from a defective cell.
3. Reserving some cells to serve as "spares." Flash memory cells have a long but finite lifetime. Therefore, some cells are held in reserve to replace any memory cells that may fail over time.
4. Creating a File Allocation Table (FAT) or other directory. To enable flash storage devices to conveniently store and access customer files, a file management system must be created to allow any device or computer to identify the files stored in the flash storage device. The most common type of file management system for flash storage devices is the File Allocation Table (FAT), which is also used on hard drives.
5. Reserving some cells for use by the flash storage device's controller, e.g., for storing firmware updates and other controller-specific information.
6. Where applicable, reserving some cells for special features. For example, the specification for Secure Digital (SD) cards requires reserved areas to support special copy protection and security features.

FAQ: KDT-010611-GEN-06

Our flash drives are plug-n-play devices. Therefore, additional drivers are not required.

FAQ: KDT-110611-GEN-09