現在、英国のサイトにアクセスしていることに気づきました。代わりにメインサイトにアクセスしますか?

ASRock - W790 WS Motherboard

configurator results memory

  • 標準

    0 GB (Removable)

  • 最大

    512 GB (w/current Kingston 64GB RDIMMs)

  • バスアーキテクチャ

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2230 (double-sided)

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-3400/W-2400 Series Intel W790

重要な構成に関する備考

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF FOUR for Quad Channel mode.
  • Mixing x4 and x8 modules is allowed, however not within the same Quad Channel bank group.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in 1DPC (1 DIMM per Channel) in Quad Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor/chipset limitations, 4800MT/s DDR5 RDIMMs installed in 2DPC (2 DIMMs per Channel) in Quad Channel configuration are limited to operate at and will safely clock down to 4400MT/s. Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • Per ASRock, S3 sleep mode is only supported with 1, 2, and 4 DIMM populations.

Kingston Fury 構成の注

  • FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock on XMP supporting processor models.
  • Only Xeon W-2400 and W-3400 X-Series processor models support XMP overclock profiles. Non "X" series processors will support PnP overclocking.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

システム用アップグレード

オーバークロックにより、安定した業界標準のメモリ仕様(速度、レイテンシ、電圧)を上回る高い性能が得られます。通常、オーバークロックは安全で、Intel や AMD などのマザーボード/システムメーカーによってサポートされていますが、ユーザーの責任で行っていただく必要があります。速度や構成によっては、システムの安定性が低下する場合があります。記載されている FURY のパーツは、マザーボードメーカーのテスト(QVL)と Kingston の社内テストに基づいていますが、システムによっては、特に超高速時にオーバークロックを安定させるために、プレミアムコンポーネント(ハイエンドプロセッサモデル、マザーボード、電源、水冷)が必要な場合があります。