Zauważyliśmy, że obecnie odwiedzasz witrynę w Wielkiej Brytanii. Czy zamiast tego chcesz odwiedzić naszą główną stronę?

Supermicro - X13SRA-TF Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maksymalna liczba

    768 GB (w/current Kingston 96GB RDIMMs)

  • Architektura magistrali

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-3400/W-2400 Series Intel W790

MBD-X13SRA-TF

Ważne informacje dotyczące konfiguracji

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF FOUR for Quad Channel mode.
  • Mixing x4 and x8 type modules is NOT allowed.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in 1DPC (1 DIMM per Channel) in Quad Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor/chipset limitations, 4800MT/s DDR5 RDIMMs installed in 2DPC (2 DIMMs per Channel) in Quad Channel configuration are limited to operate at and will safely clock down to 4400MT/s. Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • Intel limits the compatibility of 96GB RDIMMs, which cannot be mixed with any other capacities or module types.
  • All 5600MT/s and 4800MT/s memory will safely clock down to slower speeds when forced by the chipset/processor.
  • Some memory configurations may NOT be supported, please refer to manual for supported memory configuration and speeds.

Kingston Fury – uwagi dotyczące konfiguracji

  • This motherboard does not support XMP-based memory overclocking.
  • Kingston FURY Renegade Pro featuring Plug N Play (automatic overclock) at 4800MT/s will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

Kompatybilne rozwiązania do modernizacji twojego systemu

Przetaktowanie wykracza poza stabilne standardowe specyfikacje pamięci (szybkość, opóźnienia, napięcie) w celu uzyskania wyższej wydajności. Chociaż ogólnie jest bezpieczne i wspierane przez rozwiązania firm Intel, AMD oraz producentów płyt głównych/systemów, przetaktowanie odbywa się na własne ryzyko użytkownika. Niektóre konfiguracje i ustawienia szybkości mogą być niekorzystne dla stabilności systemu. Podane numery części produktów FURY określono w oparciu o testy producentów płyt głównych (QVL) i wewnętrzne testy firmy Kingston, jednak niektóre systemy mogą wymagać najwyższej klasy komponentów (procesorów, płyt głównych, zasilaczy i systemów chłodzenia wodnego), aby uzyskać stabilne przetaktowanie, zwłaszcza przy ekstremalnych szybkościach.