เราสังเกตเห็นว่าคุณกําลังเยี่ยมชมเว็บไซต์ของสหราชอาณาจักร คุณต้องการเยี่ยมชมเว็บไซต์หลักของเราแทนหรือไม่?

Gigabyte - MW53-HP0 Motherboard

configurator results memory

  • มาตรฐาน

    0 GB (Removable)

  • สูงสุด

    512 GB (w/current Kingston 64GB RDIMMs)

  • สถาปัตยกรรมบัส

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-2400 Series Intel W790

หมายเหตุเกี่ยวกับโครงร่างการทำงานที่สำคัญ

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF FOUR for Quad Channel mode.
  • Mixing x4 and x8 modules is allowed, however not within the same Quad Channel bank group.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in 1DPC (1 DIMM per Channel) in Quad Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor/chipset limitations, 4800MT/s DDR5 RDIMMs installed in 2DPC (2 DIMMs per Channel) in Quad Channel configuration are limited to operate at and will safely clock down to 4400MT/s. Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • Refer to motherboard manual and QVL for supported memory configurations and speeds.

หมายเหตุในการกำหนดโครงร่างการทำงานสำหรับ Kingston Fury

  • Per Gigabyte, this motherboard does not support XMP-based memory overclocking.
  • Kingston FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

การอัพเกรดที่รองรับสำหรับเครื่องของคุณ

การโอเวอร์คล็อกเป็นการปรับการทำงานให้เกินกว่าค่าจำเพาะที่เสถียรตามมาตรฐานอุตสาหกรรมสำหรับหน่วยความจำ (ความเร็ว ค่าหน่วงเวลา แรงดันไฟฟ้า) เพื่อให้ได้ประสิทธิภาพในการทำงานที่สูงกว่า
 แม้ว่าโดยปกติจะทำได้อย่างปลอดภัยและรองรับโดยโปรเซสเซอร์ของ Intel, AMD รวมทั้งผู้ผลิตเมนบอร์ด/เครื่อง แต่คุณจะต้องแบกรับความเสี่ยงเองเมื่อทำการโอเวอร์คล็อก
 เสถียรภาพในการทำงานของระบบอาจได้รับผลกระทบจากความเร็วและการกำหนดค่าการทำงานบางอย่าง ชิ้นส่วนของ FURY ที่แจ้งอ้างอิงจากการทดสอบของผู้ผลิตเมนบอร์ด (QVLs) และผลการทดสอบภายในของ Kingston อย่างไรก็ตามเครื่องบางเครื่องอาจต้องใช้ส่วนประกอบระดับพรีเมี่ยม (รุ่นโปรเซสเซอร์ เมนบอร์ด ตัวจ่ายไฟหรือหล่อเย็นด้วยน้ำประสิทธิภาพสูง) เพื่อให้สามารถโอเวอร์คล็อกได้อย่างเสถียร โดยเฉพาะในความเร็วระดับสูงมาก ๆ