To get started, click accept below to bring up the cookies management panel. Next, tap or click on the Personalization button to turn on the chat feature, then Save.
Thanks for contacting us. Please complete this form and click Start Chat.
There is no question that solid state drives (SSDs) are gaining in popularity for use in laptops, desktop PCs and servers. You can add speed to an old desktop PC or laptop by upgrading to an SSD from a hard disk drive (HDD) and, with their speed and reliability, SSDs are an excellent choice for new PC builds, servers and system builders.
An SSD is a storage medium that, unlike an HDD, uses non-volatile (flash) memory to hold and access data. In other words, there are no moving mechanical parts, and this makes a very big difference.
These are just a few of the many benefits that SSDs have compared to spinning-disk hard drives. Among other things, SSDs can greatly enhance the performance of your system with a simple upgrade. Here are five benefits that upgrading your computer to an SSD can provide.
1. Durability and reliability of an SSD
Heat is a major cause of failures in hard drives, and enough heat is generated by the continual motion of an HDD’s moving parts to cause it to break down over time. Since an SSD doesn’t have such parts, it can maintain a lower temperature with much higher performance. An SSD is also better able to handle drops, shakes, shocks and everyday wear and tear, making it less apt to experience data loss.
2. SSDs are faster than hard drives
SSDs are up to a hundred times faster than HDDs. SSDs offer shorter boot times for your computer, more immediate data transfer and higher bandwidth. Faster speeds mean SSDs can handle data at the ultra-high speeds necessary in today’s business world, especially when running programs that access large amounts of data such as an operating system. Also, SSDs are very stable, which ensures that stored data is secure.
SATA SSD: HDDs are only able to achieve 50-120 MB/s in write performance. In comparison, SSDs saturate the SATA bus at 550 MB/s. Despite bus limitation, it’s common to see an overall system performance improvement of 10-15 times when using SATA-based SSDs in place of legacy HDD technology.
NVMe SSD: NVMe technology utilises the PCIe bus, instead of the SATA bus, to unlock enormous bandwidth potential for storage devices. PCIe 4.0 (the current version) offers up to 32 lanes and can, in theory, transfer data at up to 64,000MB/s compared to the 600MB/s specification limit of SATA III.
3. Power and energy efficient
Since an SSD has no moving parts, it needs less power to operate compared to an HDD with a magnetic spinning disk. Energy efficiency is a big benefit in using an SSD when it comes to PC and mobile devices where battery longevity is a highly marketable and requested feature.
4. Less weight and no noise
Their smaller size allows SSDs to weigh less than larger HDDs with their magnetic heads and metallic disks. Their compact design makes SSDs perfect for laptops, tablets and other small electronic devices. The absence of moving parts also makes SSDs infinitely quieter than HDDs, whose noise and vibrations can be very distracting.
5. More practical sizes/form factors
Since their release, HDDs have been limited by their larger sizes. SSDs, on the other hand, are available in a variety of sizes, with the smallest being the size of a stick of gum, up to 2.5" form factor.
These are the most common SSD form factors:
2.5" form factor is the most common; offers the best value per GB; enclosed design
mSATA has a very small form factor; different connection type; bare circuit board; excellent where space is of concern
M.2 is a bare circuit board; available in both SATA and PCIe NVMe; small form factor; the size of a stick of gum
Final word on cost
SSDs are can be more expensive than HDDs. Since SSD technology is much newer than the technology in HDDs, their development costs are higher compared to HDDs. However, the overall gap is narrowing and the SSD cost per GB has gone down considerably in the past several years. Upgrading to a solid-state drive and increasing memory are two easy and cost-effective options for increasing PC or laptop performance. Even relatively new systems see a significant performance gain when a traditional hard drive is upgrade to an SSD. Users experience pages that load faster and applications that launch quicker. All considered, the benefits of upgrading to an SSD outweigh the cost.
More DRAM means faster PC performance when editing from video, from playback responsiveness to render time. But is 8, 16, 32 or 64GB enough? How much do you need for 1080p, 4K, or 8K?
Choosing the right SSD for your server is important since server SSDs are optimized to perform at a predictable latency level while client (desktop/laptop) SSDs are not. These difference result in better uptime and less lag for critical apps and services.
Since 1987, Kingston has been known for the highest quality memory and storage products available. We recognise the important role memory and storage play in computing productivity and take the necessary steps to guarantee a reliable product.
Testing is a cornerstone of our commitment to deliver the most reliable products on the market.
We perform rigorous tests on all of our products during each stage of production. These tests ensure quality control throughout the entire manufacturing process.
If your files don’t open immediately and programs are slow to load, you get an error message or are unable to load several programs at once, your computer may need more memory.
Learn what to look for when shopping for RAM, or Random Access Memory, including how to determine what type of memory and what capacities your motherboard can support.
