FCR-HS3 USB 3.0 Media Reader — Firmware Upgrade
File Name | File Size | File Version |
FCR-HS3-FW-v0134_0111.exe | 1,580KB | v0134_v0111 |
Description
Firmware Upgrade: v0134_v0111
Part Numbers:
FCR-HS3
- Improves compatibility with flash cards.
Supported Operating Systems:
Windows 8.1, Windows 8, Windows 7 (SP1), Vista (SP2)
Requirements: FCR-HS3
Warning: Remove all cards from the media reader before upgrading the firmware. Kingston is not responsible for any data loss that may occur if a card is left in the reader during the process. It is advised that you do NOT disconnect the media reader until the process is complete.
Installation
- Click on the FCR-HS3 Firmware v0134_0111.exe link above or the Download button below to begin the download.
- Locate the downloaded, FCR-HS3 Firmware v0134_0111.exe, file and double-click on it to open the self-extractor.
- Click on “Browse” and select “Desktop” (to easily find the extracted file)
- Locate the extracted, FCR-HS3 Firmware v0134_0111.exe, file on your desktop and double click on it.
- Plug in you FCR-HS3 reader (if you have not already) and allow your computer to recognize it completely.
- Click "Update" to initiate the firmware update.
- A window will pop up letting you know that the “Firmware Update Succeeded”.
- Remove the reader from your PC and plug it back in. The update is now complete.
Note for MAC Users
The firmware upgrade utility is not compatible with Mac OS