For information about how COVID-19 has affected our business operations, click here.

Frequently Asked Questions

More Questions

The drivers for this drive are available for Windows 8 and up and Server 2012R2 and up by either downloading it within the installation or are built into the OS. We do not support using this drive with Windows 7 or below. It will work with newer Linux versions. Please verify if your distribution supports NVMe. These are not supported in any version of MacOS. FAQ: KSD-060117-NVME-01
High-performance NVMe SSDs require adequate airflow for maximum bandwidth and performance. During heavy workloads or extensive benchmarking, the drive will heat up and the controller firmware may implement thermal throttling in order to maintain proper operating temperature and ensure drive integrity. If performance degradation is observed within these circumstances, confirm the SSD is receiving adequate cooling and/or increase the system’s fan speed to reduce drive temperatures. 

Note: Thermal throttling will engage when temperature reaches 80°C FAQ: KSD-060117-NVME-02
Our NVMe SSD rely on native Linux and Microsoft NVMe drivers. Microsoft’s native NVMe driver issues Forced Unit Access (FUA) IO writes and Flush commands to NVMe devices that have a volatile write cache. This, in effect, undermines the write caching on the target SSD by often bypassing the DRAM cache and writing directly to NAND. As a result of this behavior, the NVMe SSD’s performance is reduced. To obtain maximum performance, you need to disable write cache buffer flushing on the target drive within Windows.  

Steps to Disabling Write-Cache Buffer Flush 

1. Open Device Manager 

2. Select Disk Drives and expand, then select target drive.  

3. Right-click and select Properties 

4. Check “Turn off Windows write-cache buffer flushing on the device”  

a. Note: By disabling write-cache buffer flushing on the device, you run the risk of losing data in transit and/or data corruption in the event of a power failure. Only disable this feature if you are aware of the risks associated with it. 

Performance Comparison

FAQ: KSD-060117-KC1000-04
Kingston SSD Manager (KSM) is ending support for Microsoft Windows 7. The latest version of KSM with Windows 7 support is v1.1.2.5. If you are using Windows 7 and experience complications with KSM, please make sure you have AHCI mode enabled in BIOS and install the latest Intel RST storage driver provided by your system manufacturer. If you still need assistance, feel free to contact our Kingston Technical Support department. FAQ: KSM-001125-001-00
Kingston SSD Manager 1.1.2.6 will not offer firmware updates for NVMe SSDs until IEEE 1667 support has been disabled. In order to complete the firmware update you must do the following:

1. First, we recommend you backup your data.
2. Then use a secondary system to complete a REVERT using the PSID on the drive label. Note: Performing a REVERT will securely erase all data on the drive.
3. Disable IEEE 1667 support
4. The firmware update will become available upon refresh or restart of KSM FAQ: KSM-001125-001-01

Contact Technical Support

Questions about a Kingston product you already own? Ask a Kingston expert.

Call Technical Support

Monday-Friday 6 a.m.-6 p.m. PST

+1 (800)435-0640 (Closed)

Keep in touch! Sign up to our emails for Kingston news and more.