This site uses cookies to provide enhanced features and functionality. By using the site, you are consenting to this. We value your privacy and data security. Please review our Cookie Policy and Privacy Policy, as both have recently been updated.

Support

Videos
3e1ZzvTOuxI.png

SSD Data Migration -- Desktop and Notebook

Wo9MloZ6DNk.png

How to install an SSD in your Dell notebook

Dk-5KuTSoUs.png

How to Install an SSD in a Dell Desktop PC

J436YKPIhLA.png

How to Install an SSD in a Mac Book Pro or MacBook

xsFGrEyASgo.png

How to Install an SSD in a silver tower Mac Pro

More video

Frequently Asked Questions
General SSD FAQs

Performance decrease has been reported on some of the SSDNow drives. If you have an older SSD drive that does not have effective Garbage Collection, SSD drive performance will drop over time.This is due to the way the system overwrites data that has been flagged for deletion.

Try using the Secure Erase tool like HDDErase to wipe the drive and restore it to original condition.

FAQ: KSD-011411-GEN-12

Any of our SSDs can be used in RAID. But due to endurance specifications, only certain part numbers should be used in RAID. For servers, please contact Kingston to determine the best Kingston SSD to use for your workload.

FAQ: KSD-052511-GEN-17

Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) is a built-in monitoring capability in hard drives and SSDs. It can allow users to monitor the health of a device. It does this through monitoring software designed specifically for the S.M.A.R.T. feature. All of our SSDNow drives support S.M.A.R.T.

FAQ: KSD-011411-GEN-10

Open the control panel, open administrative tools and then open computer management. Click on Disk Management and see if the SSD drive is seen in the right window pane. If it is, right click on where it is labeled as disk 1, disk 2, etc and select "Initialize disk" (this may come up automatically when you go to Disk Management).

In XP, right click on the area to the right of that and choose "New Partition". Then choose "Primary Partition" in the partition wizard. Continue with the wizard by choosing the size, drive letter and formatting of the partition.

In Windows Vista and 7, right click on the area to the right of the disk label and choose "New Simple Volume". Continue with the wizard by choosing the size, drive letter and formatting of the partition.

In MacOS, a "disk insertion" window will appear. Click on the "initialize" button. This will take you to the disk utility. Select the Kingston drive from the list of drives on the left side of the Window. From the actions available, choose partition. For the "Volume Scheme", choose "1 partition". For the format, choose MacOS extended for a permanent drive. Choose ExFAT for an external drive (available on MacOS 10.6.6 and above). Click Apply. A warning windows will appear stating you will erase all data from the drive. Click on the partition button at the bottom.

FAQ: KSD-060314-GEN-14

Kingston realizes the importance of keeping our customers’ personal data and information confidential and secure. Kingston takes measures to ensure the security of all of our customers’ personal information when a Solid State Drive (SSD) is returned to our RMA facility for warranty replacement or repair. When an SSD reaches our repair center, it will undergo a thorough testing process. During the first phase of testing, an ATA Secure Erase is performed on the SSD which erases all data and information.ATA Secure Erase is federally-approved by the National Institute of Standards and Technology (NIST 800-88) for legal sanitization of confidential user data. If the SSD is not in a functional state and not capable of undergoing an ATA Secure Erase, the SSD is dismantled and the NAND Flash Memory is destroyed.

FAQ: KSD-022411-GEN-15

Our SATA III (6Gbit/s) SSDs are tested to be backwards compatible to SATA II (3Gbit/s). They are not designed or tested to be backwards compatible with SATA I ports (1.5Gbit/s). Most systems made before 2008 used SATA I ports. Our SSDs will likely not work in these systems.

FAQ: KSD-022714-LSI-03
OS/Compatibility FAQs
During the OS installation, go to UTILITIES / TERMINAL 

In terminal type: 

diskutil list 

Then press RETURN. Scroll up to top and verify the Kingston SSD disk (i.e. disk0, disk1, etc).

Then type: 

diskutil mountDISK disk0 (or whichever ddisk is the Kingston SSD). 

Then press RETURN. It should show "mounted successfully".

Then type: 

diskutil eraseDISK apfs YOURDRIVENAME disk0 (or whichever disk is the Kingston SSD) 

Warning – This step (eraseDISK command) will delete all data on the target drive. Confirm that you have selected the drive you wish to delete and then continue. 

Then press RETURN. It should show "successful". Then exit terminal and proceed with the normal installation of the OS.
FAQ: KSD-092917-GEN-21

SSDs do not require defragmentation. Since there are no physical disks, there is no need to organize the data in order to reduce seek time. Therefore defragmenting an SSD is not effective. Also, defragmenting an SSD can put undue wear on specific areas of the drive. SSDs are designed to write data as evenly as possible over the entire drive to reduce undue wear to any one location. Nonetheless defragmenting your SSD drive a couple of times will not harm it. However if it is done continuously over a long period, it may reduce the life of the drive.

FAQ: KSD-011411-GEN-03

Over time, most of the storage locations on an SSD get written to. When they get written to again, they need to be conditioned in order to accept new data. This can cause a delay and is seen as a reduction in drive performance. Garbage collection is a function built into a SSD that reconditions empty storage locations so when new data is written to the drive, there are locations on the SSD ready to accept data.

Although Garbage Collection function is built into most SSD drives, some drives do a better job at it than others. TRIM resolves this issue by letting the operating system tell the drive when to perform this function. At this time, only Windows 7, Server 2008, MacOS 10.7 and newer versions of Linux use TRIM. Also, there are no RAID configurations that support TRIM no matter what operating system is used. All of Kingston’s MLC based SSDNow drives are TRIM compatible. Some of our first generation SSDNow drives are not TRIM compatible. 

FAQ: KSD-011411-GEN-13

First, open an Elevated Command Prompt window.

To open an Elevated Command Prompt window: Click on Start Orb > Type "CMD.exe" in Search box > Right click on "CMD" and select "Run as Administrator" (If you receive a prompt confirmation, click YES)

To verify the TRIM command is enabled, type the following and press enter in the Elevated command:

fsutil behavior query disabledeletenotify

The results will be as follows: DisableDeleteNotify = 1 (Windows TRIM commands are disabled) DisableDeleteNotify = 0 (Windows TRIM commands are enabled)

To enable the TRIM command,type the following and press enter in the Elevated command:

fsutil behavior set disabledeletenotify 0

To disable the TRIM command,type the following and press enter in the Elevated command:

fsutil behavior set disabledeletenotify 1

FAQ: KSD-072211-GEN-18

The Windows Experience Index (WEI) merely measures the relative capability of components. The WEI only runs for a short time and does not measure the interactions of components under a software load, but rather characteristics or your hardware.

Thus the WEI does not measure performance of a system, but merely the relative hardware capabilities when running Windows 7. An article about the WEI can be found here: http://blogs.msdn.com/b/e7/archive/2009/01/19/engineering-the-windows-7-windows-experience-index.aspx

In Vista, the WEI scores ranged from 1.0 to 5.9. In Windows 7, the range has been extended upward to 7.9.

FAQ: KSD-011411-GEN-08

When the SSD is recognized in the BIOS, but Windows 7 installation does not detect the drive, follow these steps:

Disconnect any other hard drives or SSDs. Boot the Windows 7 installation disk. Choose repair, then advanced, then command prompt. Type: "diskpart" without quotes and press Enter. You will see a prompt labeled "diskpart". Type the following commands and press enter after each one.

Diskpart > Select Disk 0
Diskpart > Clean
Diskpart > Create Partition Primary Align=1024
Diskpart > Format Quick FS=NTFS
Diskpart > List Partition
Diskpart > Active
Diskpart > Exit

Then reboot the computer to the Windows 7 installation disk.

FAQ: KSD-100214-GEN-20
More Questions

ElectroStatic Discharge, ESD is simply the discharge of built up static electricity.ESD should not be taken lightly as this is one of the few things an individual can do to damage or destroy their computer or hardware components.It is like when you rub your feet on the carpet and you touch something metal.ESD can occur without the user feeling a shock and will occur when only working on the inside of the computer or handling hardware.

How to help prevent ESD
The best method of preventing ESD is to use an ESD wrist strap or a grounding mat or table.However, because most users do not have access to these items, we have included the below steps to help reduce the chance of ESD as much as possible.

  • Standing – We recommend that you are standing at all times when working on the computer. Setting on a chair can generate more electrostatic.
  • Cords - Make sure everything is removed from the back of the computer (power cord, mouse, keyboard, etc).
  • Clothes - Make sure not to wear any clothing that conducts a lot of Electrical Charge, such as a wool sweater.
  • Accessories - To help reduce ESD and help prevent other problem, it is also a good idea to remove all jewelry.
  • Weather - Electrical storms can increase the ESD risk; unless absolutely necessary, try not to work on a computer during an electrical storm.In very dry areas, the air itself becomes a part of the electrostatic build-up mechanism every time there is an air flow (wind, air conditioning, blower) passing over an insulated surface.Do not let high humidity levels build a false confidence, and beware of corrosion problems with interconnects and other electrical interfaces.

To learn more about ESD and how to protect your electronics, please refer to the below site.

ESD Association
http://www.esda.org/aboutESD.html

FAQ: KTC-Gen-ESD
Live chat with Technical Support

Monday-Friday 6 a.m.-6 p.m. PST

Call Technical Support

1(800)435-0640

Monday-Friday 6 a.m.-6 p.m. PST

        Back To Top