HP/HPE - Workstation Z8 G4

-
Standar
8 GB (Removable)
-
Maksimum
1,5 TB LRDIMMs
1,5 TB Reg ECC RDIMMs (*Depending on CPU)
3 TB with 128GB 3DS LRDIMMs
-
8GB Standard:
Processor 1 (installed):
8 GB -
Processor 2 (optional):
-
Arsitektur Bus
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
USB 2.0/3.x Type-C
SSD - M.2 NVMe
-
12 Socket(s) per CPU
24 Socket(s) using two CPUs
-
Intel Xeon 1st/2nd Gen Intel C62x Series
7BG76UT
-
Reg ECC RDIMMs:
Configurations up to 1.5GB* can be reached using Kingston's 8, 16, 32, and 64GB modules IN GROUPS OF SIX. *Depending on CPU.
-
LRDIMMs:
Virtually any configuration up to 1.5TB can be reached using Kingston's 64GB modules IN GROUPS OF SIX.
Catatan Konfigurasi Penting
- Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
- Memory will clock down to run at optimal speeds depending on processor model installed. See latest QuickSpecs for processor models and supported memory speeds.
- This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available.
Upgrade yang Kompatibel untuk Sistem Anda
- Memori Khusus Sistem
- Solid-State Drive
-
Nomor Komponen: SFYR2S/1T0
- Nomor Komponen: SFYR2S/1T0
- PCIe 5.0 NVMe M.2
- Kecepatan baca hingga 14.200 MB/dtk, kecepatan tulis hingga 11.000 MB/dtk
- Menyertakan perangkat lunak pengklonaan Acronis
- Bersisi tunggal
-
Nomor Komponen: SNV3S/4000G
- Nomor Komponen: SNV3S/4000G
- Kinerja PCIe NVMe Gen 4x4
- Garansi terbatas 5 tahun
- Menyertakan perangkat lunak pengklonaan Acronis
- Baca hingga 6.000MB/dtk, Tulis hingga 5.000MB/dtk
- Pelajari lebih
-
Nomor Komponen: SKC3000S/1024G
- Nomor Komponen: SKC3000S/1024G
- PCIe 4.0 NVMe M.2
- Kecepatan Baca 7.000MB/dtk, Kecepatan Tulis 6.000MB/dtk
- Menyertakan perangkat lunak pengklonaan (cloning) Acronis
- Satu sisi
- Pelajari lebih
-
Nomor Komponen: SKC600/2048G
- Nomor Komponen: SKC600/2048G
- Menyertakan perangkat lunak pengklonaan (cloning) Acronis
- SATA Rev 3.0
- Enkripsi XTS-AES 256-bit, TCG Opal 2.0, eDrive
- Teknologi 3D TLC NAND
- Kecepatan Baca hingga 550MB/dtk, Kecepatan Tulis hingga 520MB/dtk
- Pelajari lebih
-
Nomor Komponen: SA400S37/960G
- Nomor Komponen: SA400S37/960G
- SATA Rev 3.0
- Kecepatan Baca hingga 500MB/s, Kecepatan Tulis hingga 450MB/s
- Menyertakan perangkat lunak pengklonaan (cloning) Acronis
- Pelajari lebih