HP/HPE - ProLiant DL345 Gen12

configurator results memory

Máximo

6 TB Reg ECC RDIMMs

Ver actualizaciones de memoria

Processor 1:

Processor 2:

Arquitectura de bus

USB 2.0/3.x Type-A

12 Socket(s) per CPU

24 Socket(s) using two CPUs

AMD EPYC 9005 Series

Reg ECC RDIMMs:

Configuration up to 3TB can be reached using Kingston's 32, 64, and 128GB modules IN GROUPS OF TWELVE.

MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF TWELVE FOR MAXIMUM MEMORY PERFORMANCE.
Some memory configurations may NOT be supported, please refer to manual for supported memory configuration and speeds. The 96GB module can only be configured in groups of 12 per CPU.
Mixing module types and densities (x4, x8, 16Gbit, 24Gbit, 32Gbit) is NOT allowed. All installed modules must be identical.
Per AMD, 4800MT/s is supported in 1DPC (1 DIMM per channel) configuration with 4th Gen EPYC processor models. In 2DPC (2 DIMMs per channel) memory will clock down to 4400MT/s with 1R (Single Rank) DIMMs installed, and 4000MT/s with 2R (Dual Rank) DIMMs installed.
AMD EPYC 9005 series processors support up to 6000MT/s DDR5. Faster modules at 6400MT/s will safely clock down to operate at supported speeds based on the installed configuration:

- 1 DIMM per channel design: up to 6000MT/s
- 2 DIMM per channel design, installed with 1DPC: up to 5200MT/s
- 2 DIMM per channel design, installed with 2DPC: up to 4400MT/s
Only AMD EPYC 9005 series processors can use memory modules built with 32Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed. Refer to manual for supported memory configurations and speeds.

* Kits: la garantía quedará anulada y no se aceptarán devoluciones si las unidades dentro del kit se venden o usan de forma independiente.