Nous remarquons que vous êtes actuellement en train de visiter le site du Royaume-Uni. Souhaitez-vous plutôt visiter notre site principal?

MSI - Desktop Codex R 12th

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    128 GB

  • Architecture du bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    SSD - SATA 3.5-inch

    USB 2.0/3.x Type-C

    SSD - M.2 SATA

    SSD M.2 NVME 2280 (double-sided)

  • 4 Socket(s)

  • Intel Core i3 12th Gen Intel B660

    Intel Core i5 12th Gen Intel B660

    Intel Core i7 12th Gen Intel B660

    Intel Core i9 12th Gen Intel B660

Codex R 12TC-047US; Codex R 12TC-048US; Codex R 12TG-049US; Codex R 12TH-053US; CoR12TC047; CoR12TC048; CoR12TG049; CoR12TH053

Notes de configuration importantes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.

Notes de configuration Kingston Fury

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations. Per MSI, overclocking is limited by the Ranks and number of DIMMs installed per channel.

Mises à niveau compatibles pour votre système

L’overclocking repousse les spécifications stables de la mémoire (vitesse, latences, tensions) pour offrir une performance supérieure. Bien que l’overclocking soit considéré en général comme une opération sûre et prise en charge par Intel, AMD et d’autres fabricants de cartes mères et de systèmes, n'oubliez pas que vous le réalisez à vos propres risques. Certaines vitesses et configurations peuvent compromettre la stabilité du système. Les composants FURY mentionnés reposent sur les essais du fabricant de la carte mère (QVL) et les essais internes de Kingston. Toutefois, certains systèmes pourraient nécessiter des composants haut de gamme (modèles de processeurs, de cartes mères, de modules d’alimentation et de refroidissement à l’eau haut de gamme) afin d’obtenir un overclocking stable, surtout aux vitesses extrêmes.