HP/HPE - ProLiant DL360e Gen8 (G8)

-
Standard
12 GB (Removable)
-
Massimo
96 GB ECC UDIMMs
192 GB ECC RDIMMs
384 GB LRDIMMs
-
12GB Standard:
Processor 1 (installed):
4 GB4 GB4 GB -
Processor 2 (optional):
-
Architettura bus
PCI-X
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
12 Socket(s) using two processors
6 Socket(s) per processor
-
Intel Xeon E5-2400 v2 Series Intel C600 Series
Intel Xeon E5-2400 Series Intel C600 Series
668812-001; 668813-001; 668814-001; 668815-001; 683947-425; 686210-S01; 686211-S01; 686212-S01; 716675-S01; 747088-001; 747089-001; 747090-001; 747091-S01; 747092-S01; 747093-S01; 747094-S01; 747096-425
-
Reg ECC RDIMMs:
Virtually any configuration up to 192GB can be reached using Kingston's 4, 8, and 16GB modules.
-
ECC UDIMMs:
Virtually any configuration up to 96GB can be reached using Kingston's 4 and 8GB modules.
-
LRDIMMs:
Virtually any configuration up to 384GB can be reached using any combination of Kingston's 32GB Load Reduced DIMMs.
Note importanti sulla configurazione
- This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
- If only one processor is installed, only 6 DIMM slots are available. When populating with two processors 12 DIMM slots are available.
- Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- 4GB DDR3-1333 Reg ECC modules come in two versions: 313/4G using x4 and 3138/4G using x8 DRAM. The two parts may be installed in the same system but not within the same memory bank. Use like modules for dual and triple channel operation.
- Xeon E5-2600 v2 series processors require HP System ROM revision 09/08/2013 or newer. Revision 09/18/2013 or newer is required if using LRDIMMs.
Upgrade compatibili per i vostri sistemi
- Memorie per sistemi specifici
- Drive allo stato solido
-
Numero di parte: KTH-PL313ELV/4GReplaced by KTH-PL316ELV/4G
- Numero di parte: KTH-PL313ELV/4G
- DDR3 1333MT/s ECC Unbuffered DIMM CL9 2RX8 1.35V 240-pin 2Gbit
DDR3 1333MT/s ECC Unbuffered DIMM CL9 2RX8 1.35V 240-pin 2Gbit
-
Numero di parte: KTH-PL313LLQ/32GReplaced by KTH-PL316LLQ/32G
- Numero di parte: KTH-PL313LLQ/32G
- DDR3 1333MT/s ECC Load Reduced DIMM CL9 4RX4 1.35V 240-pin 4Gbit
DDR3 1333MT/s ECC Load Reduced DIMM CL9 4RX4 1.35V 240-pin 4Gbit
-
Numero di parte: KTH-PL3168/4GReplaced by KTH-PL316S8/4G
- Numero di parte: KTH-PL3168/4G
- DDR3 1600MT/s ECC Registered DIMM CL11 2RX8 1.5V 240-pin 2Gbit
DDR3 1600MT/s ECC Registered DIMM CL11 2RX8 1.5V 240-pin 2Gbit
-
Numero di parte: KTH-PL316E/4GReplaced by KTH-PL316ES/4G
- Numero di parte: KTH-PL316E/4G
- DDR3 1600MT/s ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 2Gbit
DDR3 1600MT/s ECC Unbuffered DIMM CL11 2RX8 1.5V 240-pin 2Gbit
-
Numero di parte: KTH-PL316/8GReplaced by KTH-PL316S/8G
- Numero di parte: KTH-PL316/8G
- DDR3 1600MT/s ECC Registered DIMM CL11 2RX4 1.5V 240-pin 2Gbit
DDR3 1600MT/s ECC Registered DIMM CL11 2RX4 1.5V 240-pin 2Gbit
-
Numero di parte: KTH-PL316S/4GReplaced by KTH-PL316S8/4G
- Numero di parte: KTH-PL316S/4G
- DDR3 1600MT/s ECC Registered DIMM CL11 1RX4 1.5V 240-pin 2Gbit
DDR3 1600MT/s ECC Registered DIMM CL11 1RX4 1.5V 240-pin 2Gbit
-
Numero di parte: KTH-PL313LV/8GReplaced by KTH-PL316LV/8G
- Numero di parte: KTH-PL313LV/8G
- DDR3 1333MT/s ECC Registered DIMM CL9 2RX4 1.35V 240-pin 2Gbit
DDR3 1333MT/s ECC Registered DIMM CL9 2RX4 1.35V 240-pin 2Gbit
-
Numero di parte: KTH-PL313E/4GReplaced by KTH-PL316ES/4G
- Numero di parte: KTH-PL313E/4G
- DDR3 1333MT/s ECC Unbuffered DIMM CL9 2RX8 1.5V 240-pin 2Gbit
DDR3 1333MT/s ECC Unbuffered DIMM CL9 2RX8 1.5V 240-pin 2Gbit
-
Numero di parte: SEDC600ME/1920G
- Numero di parte: SEDC600ME/1920G
- Progettato appositamente per i data center
- Funzionalità PLP (Power loss protection) integrate
- Latenza ridotta e IOPS costanti
- Include Acronis cloning software
- Crittografia AES 256-bit, TCG Opal 2.0
- 560MB/s in lettura, 530MB/s in scrittura
- Ulteriori informazioni
-
Numero di parte: SEDC600M/1920G
- Numero di parte: SEDC600M/1920G
- Progettata appositamente per i data center
- Funzionalità PLP (Power loss protection) integrate
- Latenze e IOPS costanti e uniformi e QoS altamente affidabili
- Include Software di clonazione Acronis
- Fino a 560MB/s in lettura e 530MB/s in scrittura
- Ulteriori informazioni