KC3000 PCIe 4.0 NVMe M.2 SSD - Support
Ressourcen
Videos
Häufig gestellte Fragen
Dies ist bei Flashspeichern üblich, egal ob es sich um interne SSDs oder externe USB-Sticks handelt, und liegt zum Teil daran, dass die Hersteller von Flashspeichern im Vergleich zu Festplatten mit sich drehenden Platten unterschiedliche Berechnungsmethoden für Megabyte verwenden. Festplattenhersteller berechnen ein Megabyte (oder 1.000x1.000 Byte) als 1.000KB, während die binäre Berechnung für Flash-basierten Speicher 1.024KB beträgt.
Beispiel: Für ein Flash-basiertes 1TB-Speichergerät berechnet Windows eine Kapazität von 931,32GB. (1.000.000.000.000÷1.024÷1.024÷1.024=931,32GB).
Außerdem reserviert Kingston einen Teil der aufgelisteten Kapazität für die Formatierung und andere Funktionen wie Firmware und/oder controllerspezifische Informationen, wodurch ein Teil der aufgelisteten Kapazität nicht für die Datenspeicherung zur Verfügung steht.
FAQ: KDT-010611-GEN-06
War dies hilfreich?
FAQ: KSD-001525-001-00
War dies hilfreich?
FAQ: KSD-012010-001-00
War dies hilfreich?
FAQ: KSD-012010-001-01
War dies hilfreich?
If this is not possible, or if you previously cloned your old data to your new drive, confirm that the new drive appears as a boot device in the system BIOS, then select it for booting.
FAQ: KSD-012010-001-03
War dies hilfreich?
-Confirm that the system BIOS recognizes your new SSD and if not, visit the motherboard / system manufacturer’s website to see if there is a new BIOS available.
-Verify your BIOS settings are configured to accept a new NVMe SSD.
-Confirm that your target operating system supports NVMe SSDs (e.g., Windows 8 or later)
Note: Kingston SSDs do not require additional drivers to operate.
FAQ: KSD-012010-001-05
War dies hilfreich?
https://support.microsoft.com/en-us/topic/update-to-add-native-driver-support-in-nvm-express-in-windows-7-and-windows-server-2008-r2-03cd423b-d42e-66c2-722b-019d16455a6b
FAQ: KSD-012010-001-06
War dies hilfreich?
FAQ: KSD-012010-001-07
War dies hilfreich?
If the drive is present in the BIOS, you may need to initialize the disk within the operating system. Follow the steps below to initialize.
For Windows:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Windows OS.
Step 2: Press Windows + X and choose Disk Management.
Step 3: If the SSD is new and not initialized, a popup will appear saying "Initialize Disk."
Step 4: Choose between: MBR (Master Boot Record): Suitable for drives under 2TB and older systems. GPT (GUID Partition Table): Recommended for modern systems and drives larger than 2TB.
Step 5: Click OK to initialize the disk.
Step 6: Once initialized, you'll see the SSD as "Unallocated." Right-click on it and select New Simple Volume.
Step 7: Follow the on-screen prompts (keeping all defaults is Okay) to format and assign a drive letter to the SSD.
For macOS:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Mac OS.
Step 2: Open Disk Utility (you can find it using Spotlight with Cmd + Space and then typing "Disk Utility").
Step 3: In the left pane, select your SSD.
Step 4: Click on Erase.
Step 5: Provide a name for the drive, and under Format, choose: APFS for newer Macs and SSDs. Mac OS Extended (Journaled) for older systems or HDDs.
Step 6: Click Erase. Once the process completes, the SSD will be ready for use.
For Linux:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Linux OS.
Step 2: Open a terminal.
Step 3: Enter sudo fdisk -l to list all connected drives. Identify your SSD by its size and note the device name, e.g., /dev/sdb.
Step 4: Initialize the SSD using fdisk or parted. Here's a basic guide using fdisk: Enter sudo fdisk /dev/sdb (replace /dev/sdb with your SSD's device name). Press g to create a new GPT partition table. Press n to create a new partition. Follow the prompts to specify the size and type. Press w to write the changes.
Step 5: Format the new partition on the SSD (e.g., /dev/sdb1). You can format it with the filesystem of your choice: For ext4: sudo mkfs.ext4, For ext3: sudo mkfs.ext3 /dev/sdb1 /dev/sdb1, For FAT32: sudo mkfs.vfat /dev/sdb1
Step 6: Mount the SSD: Create a mount point: sudo mkdir /mnt/myssd, Mount the SSD: sudo mount /dev/sdb1 /mnt/myssd, Remember to replace /dev/sdb1 with your SSD's partition name.
FAQ: KSD-012010-001-15
War dies hilfreich?
FAQ: KSD-012010-001-18
War dies hilfreich?
https://www.kingston.com/en/blog/pc-performance/two-types-m2-vs-ssd
FAQ: KSD-012010-001-16
War dies hilfreich?
If your SSD requires new firmware, you will receive a notification when running Kingston’s SSD Manager software, located here: www.kingston.com/ssdmanager
FAQ: KSD-012010-001-11
War dies hilfreich?
M.2 ist ein physischer Formfaktor. SATA und PCIe beziehen sich jeweils auf die Speicherschnittstelle. Der Hauptunterschied liegt in der Leistung und dem Protokoll (Sprache) der M.2-SSD.
Die Spezifikationen der M.2 wurden so konzipiert, dass sie sowohl eine SATA- als auch eine PCIe-Schnittstelle für SSDs aufnehmen kann. M.2-SATA-SSDs verwenden denselben Controller, der bei typischen 2,5-Zoll-SATA-SSDs verwendet wird. M.2-PCIe-SSDs werden einen Controller verwenden, der speziell zur Unterstützung des PCIe-Protokolls konzipiert wurde. Eine M.2-SSD kann nur ein Protokoll unterstützen. Jedoch haben verschiedene Systeme M.2-Steckplätze, die sowohl SATA als auch PCIe unterstützen können.
FAQ: KSD-004005-001-00
War dies hilfreich?
https://www.kingston.com/en/blog/pc-performance/nvme-vs-sata
FAQ: KSD-012010-001-19
War dies hilfreich?
FAQ: KSD-012010-001-04
War dies hilfreich?
If your SSD requires new firmware, you will receive a notification when running Kingston’s SSD Manager software, located here: www.kingston.com/ssdmanager
FAQ: KSD-012010-001-11
War dies hilfreich?
FAQ: KSD-012010-001-12
War dies hilfreich?
FAQ: KSD-012010-001-13
War dies hilfreich?
FAQ: KSD-012010-001-14
War dies hilfreich?
FAQ: KSD-012010-001-04
War dies hilfreich?
-Confirm that the system BIOS recognizes your new SSD and if not, visit the motherboard / system manufacturer’s website to see if there is a new BIOS available.
-Verify your BIOS settings are configured to accept a new NVMe SSD.
-Confirm that your target operating system supports NVMe SSDs (e.g., Windows 8 or later)
Note: Kingston SSDs do not require additional drivers to operate.
FAQ: KSD-012010-001-05
War dies hilfreich?
If the drive is present in the BIOS, you may need to initialize the disk within the operating system. Follow the steps below to initialize.
For Windows:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Windows OS.
Step 2: Press Windows + X and choose Disk Management.
Step 3: If the SSD is new and not initialized, a popup will appear saying "Initialize Disk."
Step 4: Choose between: MBR (Master Boot Record): Suitable for drives under 2TB and older systems. GPT (GUID Partition Table): Recommended for modern systems and drives larger than 2TB.
Step 5: Click OK to initialize the disk.
Step 6: Once initialized, you'll see the SSD as "Unallocated." Right-click on it and select New Simple Volume.
Step 7: Follow the on-screen prompts (keeping all defaults is Okay) to format and assign a drive letter to the SSD.
For macOS:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Mac OS.
Step 2: Open Disk Utility (you can find it using Spotlight with Cmd + Space and then typing "Disk Utility").
Step 3: In the left pane, select your SSD.
Step 4: Click on Erase.
Step 5: Provide a name for the drive, and under Format, choose: APFS for newer Macs and SSDs. Mac OS Extended (Journaled) for older systems or HDDs.
Step 6: Click Erase. Once the process completes, the SSD will be ready for use.
For Linux:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Linux OS.
Step 2: Open a terminal.
Step 3: Enter sudo fdisk -l to list all connected drives. Identify your SSD by its size and note the device name, e.g., /dev/sdb.
Step 4: Initialize the SSD using fdisk or parted. Here's a basic guide using fdisk: Enter sudo fdisk /dev/sdb (replace /dev/sdb with your SSD's device name). Press g to create a new GPT partition table. Press n to create a new partition. Follow the prompts to specify the size and type. Press w to write the changes.
Step 5: Format the new partition on the SSD (e.g., /dev/sdb1). You can format it with the filesystem of your choice: For ext4: sudo mkfs.ext4, For ext3: sudo mkfs.ext3 /dev/sdb1 /dev/sdb1, For FAT32: sudo mkfs.vfat /dev/sdb1
Step 6: Mount the SSD: Create a mount point: sudo mkdir /mnt/myssd, Mount the SSD: sudo mount /dev/sdb1 /mnt/myssd, Remember to replace /dev/sdb1 with your SSD's partition name.
FAQ: KSD-012010-001-15
War dies hilfreich?
FAQ: KSD-012010-001-18
War dies hilfreich?
https://www.kingston.com/en/blog/pc-performance/two-types-m2-vs-ssd
FAQ: KSD-012010-001-16
War dies hilfreich?
FAQ: KSD-012010-001-04
War dies hilfreich?
FAQ: KSD-012010-001-00
War dies hilfreich?
FAQ: KSD-012010-001-01
War dies hilfreich?
If this is not possible, or if you previously cloned your old data to your new drive, confirm that the new drive appears as a boot device in the system BIOS, then select it for booting.
FAQ: KSD-012010-001-03
War dies hilfreich?
-Confirm that the system BIOS recognizes your new SSD and if not, visit the motherboard / system manufacturer’s website to see if there is a new BIOS available.
-Verify your BIOS settings are configured to accept a new NVMe SSD.
-Confirm that your target operating system supports NVMe SSDs (e.g., Windows 8 or later)
Note: Kingston SSDs do not require additional drivers to operate.
FAQ: KSD-012010-001-05
War dies hilfreich?
https://support.microsoft.com/en-us/topic/update-to-add-native-driver-support-in-nvm-express-in-windows-7-and-windows-server-2008-r2-03cd423b-d42e-66c2-722b-019d16455a6b
FAQ: KSD-012010-001-06
War dies hilfreich?
FAQ: KSD-012010-001-18
War dies hilfreich?
If the drive is present in the BIOS, you may need to initialize the disk within the operating system. Follow the steps below to initialize.
For Windows:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Windows OS.
Step 2: Press Windows + X and choose Disk Management.
Step 3: If the SSD is new and not initialized, a popup will appear saying "Initialize Disk."
Step 4: Choose between: MBR (Master Boot Record): Suitable for drives under 2TB and older systems. GPT (GUID Partition Table): Recommended for modern systems and drives larger than 2TB.
Step 5: Click OK to initialize the disk.
Step 6: Once initialized, you'll see the SSD as "Unallocated." Right-click on it and select New Simple Volume.
Step 7: Follow the on-screen prompts (keeping all defaults is Okay) to format and assign a drive letter to the SSD.
For macOS:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Mac OS.
Step 2: Open Disk Utility (you can find it using Spotlight with Cmd + Space and then typing "Disk Utility").
Step 3: In the left pane, select your SSD.
Step 4: Click on Erase.
Step 5: Provide a name for the drive, and under Format, choose: APFS for newer Macs and SSDs. Mac OS Extended (Journaled) for older systems or HDDs.
Step 6: Click Erase. Once the process completes, the SSD will be ready for use.
For Linux:
Step 1: Confirm the drive is properly attached, and power on the system, then boot into Linux OS.
Step 2: Open a terminal.
Step 3: Enter sudo fdisk -l to list all connected drives. Identify your SSD by its size and note the device name, e.g., /dev/sdb.
Step 4: Initialize the SSD using fdisk or parted. Here's a basic guide using fdisk: Enter sudo fdisk /dev/sdb (replace /dev/sdb with your SSD's device name). Press g to create a new GPT partition table. Press n to create a new partition. Follow the prompts to specify the size and type. Press w to write the changes.
Step 5: Format the new partition on the SSD (e.g., /dev/sdb1). You can format it with the filesystem of your choice: For ext4: sudo mkfs.ext4, For ext3: sudo mkfs.ext3 /dev/sdb1 /dev/sdb1, For FAT32: sudo mkfs.vfat /dev/sdb1
Step 6: Mount the SSD: Create a mount point: sudo mkdir /mnt/myssd, Mount the SSD: sudo mount /dev/sdb1 /mnt/myssd, Remember to replace /dev/sdb1 with your SSD's partition name.
FAQ: KSD-012010-001-15
War dies hilfreich?
FAQ: KSD-012010-001-14
War dies hilfreich?
FAQ: KSD-012010-001-13
War dies hilfreich?
FAQ: KSD-012010-001-12
War dies hilfreich?
If your SSD requires new firmware, you will receive a notification when running Kingston’s SSD Manager software, located here: www.kingston.com/ssdmanager
FAQ: KSD-012010-001-11
War dies hilfreich?
FAQ: KSD-012010-001-07
War dies hilfreich?
https://www.kingston.com/en/blog/pc-performance/two-types-m2-vs-ssd
FAQ: KSD-012010-001-16
War dies hilfreich?
Still Need Assistance?
E-Mail an Technischen Support
Füllen Sie ein kurzes Formular aus, um einen Antrag per E-Mail zu stellen.
E-Mail-AdresseRufen Sie den Technischen Support an.
Montag–Freitag 6 a.m.-6 p.m. PT
+1 (800)435-0640