support category usb
DataTraveler Max USB Flash Drive (DTMAX)

DataTraveler Max USB Flash Drive - Support

Videos

832342139 3:08

Verwendung eines USB-Sticks auf einem Mac

832341773 2:52

Verwendung eines USB-Sticks mit Ubuntu Linux

832341957 3:16

Verwendung eines USB-Sticks an einem Windows-PC

Häufig gestellte Fragen

The transfer rate for DTMAX series is contingent on multiple factors. The USB port on the host device is one of the primary reasons performance of the USB drive will be limited. The interface needed for optimal performance is USB 3.2 Gen 2 (10Gbs).

Please confirm that the host system meets the following criteria:

The host machine has a Type-C or Type-A USB 3.2 Gen 2 port.
If using an extension cable or USB hub, please make sure the cable or USB hub is rated for USB 3.2 Gen 2. Cables and hubs of low quality may be incapable of high-speed data transfer, please check the cable manufacturer’s specifications.
The host machine has the latest updates, including BIOS, Chipset, and USB drivers.

FAQ: DTMAX-01001-001

War dies hilfreich?

Yes. Thunderbolt/USB4 is often limited to USB 3.2 Gen 2 speeds (10Gbs) (see table below). Please check the specification of your host device.

Kingston -> Compatible Interface for Optimal Performance Standard Max USB Data Transfer Speed    
USB 2.0 480 Mbps
USB 3.2 Gen 1 5 Gbps
DTMAX-> USB 3.2 Gen 2 10 Gbps
DTMAX-> USB 3.2 Gen 2x2 20 Gbps
DTMAX -> USB4/Thunderbolt 10 Gbps, 20 Gbps, 40 Gbps
(Depends on host specs)


FAQ: DTMAX-01001-002

War dies hilfreich?

Our flash drives are plug-n-play devices. Therefore, additional drivers are not required.

FAQ: KDT-110611-GEN-09

War dies hilfreich?

Dies ist bei Flashspeichern üblich, egal ob es sich um interne SSDs oder externe USB-Sticks handelt, und liegt zum Teil daran, dass die Hersteller von Flashspeichern im Vergleich zu Festplatten mit sich drehenden Platten unterschiedliche Berechnungsmethoden für Megabyte verwenden. Festplattenhersteller berechnen ein Megabyte (oder 1.000x1.000 Byte) als 1.000KB, während die binäre Berechnung für Flash-basierten Speicher 1.024KB beträgt.

Beispiel: Für ein Flash-basiertes 1TB-Speichergerät berechnet Windows eine Kapazität von 931,32GB. (1.000.000.000.000÷1.024÷1.024÷1.024=931,32GB).

Außerdem reserviert Kingston einen Teil der aufgelisteten Kapazität für die Formatierung und andere Funktionen wie Firmware und/oder controllerspezifische Informationen, wodurch ein Teil der aufgelisteten Kapazität nicht für die Datenspeicherung zur Verfügung steht.

FAQ: KDT-010611-GEN-06

War dies hilfreich?

Still Need Assistance?

Rufen Sie den Technischen Support an.

Montag–Freitag 6 a.m.-6 p.m. PT

+1 (800)435-0640

Chat With Support

Jetzt chatten