Intel - R2308GZ4GC Server System

-
Standard
0 GB (Removable)
-
Maximum
128 GB using 16 x 8GB ECC UDIMMs
512 GB using 16 x 32GB Reg QR RDIMMs
768 GB using 24 x 32GB Load Reduced LRDIMMs
-
CPU 1:
-
CPU 2:
-
Bus Architecture
USB 2.0/3.x Type-A
PCI-X
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
24 Socket(s) Total
12 Socket(s) per processor
-
Intel Xeon E5-2600 Intel C600 Series
-
Registered RDIMMs:
Virtually any configuration up to 512GB can be reached using Kingston's 2, 4, 8, 16 and 32GB RDIMM modules or kits.
-
Load Reduced LRDIMMs:
Virtually any configuration up to 768GB can be reached using Kingston's 32GB LRDIMM modules or kits.
-
ECC UDIMMs:
Virtually any configuration up to 128GB can be reached using Kingston's 2, 4, and 8GB modules or kits.
Important Configuration Notes
- Kingston's DDR3-1600 modules automatically clock down to 1333MHz, 1066MHz, and 800MHz depending on which Intel Xeon model is installed and how many module banks are populated. Please refer to the system manual for proper installation of DIMMs for Single, Dual, Triple, and Quad Channel configurations.
- Due to chipset limitations, Kingston's DDR3 Quad Rank memory is limited to operate at a maximum of 1066Mhz. When two Quad Rank modules are installed per channel, the processor will automatically clock them down to 800MHz. Quad Rank modules are limited to 2 DIMMs Per Channel only. Third bank must remain empty. Maximum configuration is 512GB (16x32GB QR RDIMMs).
- Mixing x4 and x8 modules is allowed, however not within the same bank.
- Intel Xeon E5 Series processors support 1.5V DDR3 and 1.35V low-voltage DDR3L memory. If 1.5V and 1.35V DIMMs are mixed, all DIMMs run at 1.5V.
- Kingston offers Unbuffered ECC UDIMM, Registered RDIMM and Load Reduced LRDIMM memory modules. Modules of different memory types CANNOT be mixed within the same system.
Compatible Upgrades For Your System
- Solid-State Drives
-
Part Number: SEDC600ME/1920G
- Part Number: SEDC600ME/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more