HP/HPE - ProLiant SL270s Gen8 (G8)

configurator results memory

  • Standard

    8 GB (Removable)

  • Maximum

    128 GB ECC UDIMMs

    256 GB RDIMMs

    512 GB LRDIMMs

  • 8GB Standard:

    Processor 1 (installed):

    4 Go
    4 Go
  • Processor 2 (optional):

  • Architecture du bus


    PCI Express

    SSD - SATA 2.5-inch 9.5mm

    SSD - SATA 3.5-inch

  • 16 Socket(s) using two processors

    8 Socket(s) per processor

  • Intel Xeon E5-2600 Intel C600 Series

    Intel Xeon E5-2600 v2 Intel C600 Series

659043-B21; 659051-B21

Notes de configuration importantes

  • This system supports Registered ECC (RDIMM) or Unbuffered ECC (ECC UDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM, ECC UDIMM and LRDIMM is not supported within this system.
  • If only one processor is installed, only 8 DIMM slots are available. When populating with two processors 16 DIMM slots are available.
  • White DIMM slots designate the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
  • The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V. Using the HP RBSU, 1.35V DIMMs can be changed to operate at 1.5V.
  • Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, 1333MHz or 1066MHz. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
  • 1866MHz and 1600MHz Low Voltage memory requires E5-2600 v2 series processors.
  • Xeon E5-2600 v2 series processors require HP System ROM revision 09/08/2013 or newer. Revision 09/18/2013 or newer is required if using LRDIMMs.

Mises à niveau compatibles pour votre système