ASUS - PRIME Z790M-PLUS

configurator results memory

  • Padrão

    0 MB (Removable)

  • Máximo

    192 GB

  • Arquitetura de barramento

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th/13th/14th Gen Intel Z790

    Intel Core i5 12th/13th/14th Gen Intel Z790

    Intel Core i7 12th/13th/14th Gen Intel Z790

    Intel Core i9 12th/13th/14th Gen Intel Z790

Notas de configuração importantes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • JEDEC spec (ValueRAM) DIMMs will operate at 4800MT/s DDR5 installed in 1DPC (1 DIMM per Channel or 1x Dual Channel kit) configurations on Intel 12th Gen processors. Due to processor/chipset limitations DIMMs installed in 2DPC (2 DIMMs per Channel or 2x Dual Channel kits) are limited to operate at and will safely clock down to 4400MT/s or 4000MT/s. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • With an Intel 13th Gen processor installed, the following JEDEC spec (non-OC) memory speeds are supported:
  • 1DPC 1R Up to 5600MT/s
  • 1DPC 2R Up to 5200MT/s
  • 2DPC 1R Up to 5200MT/s
  • 2DPC 2R Up to 5200MT/s

Notas de configuração do Kingston Fury

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable. An Intel 13th Gen or 14th Gen processor are required for K4 "Kit of 4" support.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • Per ASUS, with an Intel 13th Gen processor installed, the following overclocked memory speeds are supported:
  • 1DPC 1R Up to 7200+ MT/s (OC)
  • 1DPC 2R Up to 6400+ MT/s (OC)
  • Performance may increase with BIOS updates.

Atualizações Compatíveis para seu sistema

O overclock pressiona as especificações de memória estáveis do setor (velocidade, latências, tensão) para atingir uma maior e melhor performance. Embora geralmente seguro e suportado pela Intel, AMD e os fabricantes do sistema/placa-mãe, o overclock é feito por sua conta e risco. A estabilidade do sistema pode ser comprometida por algumas velocidades e configurações. Os produtos FURY listados são baseados em testes de fabricante de placa-mãe (QVLs) e testes internos da Kingston, entretanto alguns sistemas podem precisar de componentes premium (modelos de processadores de ponta, placas-mãe, suprimentos de energia e resfriamento por água) para alcançar um overclock estável, especialmente em velocidades extremas.

Kingston FURY Renegade com dissipador de calor (SFYRSK/xxxG, SFYRDK/xxxG) caberá na maioria dos sistemas que podem acomodar seu tamanho (~80mm x 23.67mm x 10.5mm). Isso inclui uma variedade de placas-mãe, desktops, PCs Gamer e o PlayStation 5. Se você não tem certeza se caberá, consulte o manual do fabricante do seu sistema ou contate o Suporte Técnico da Kingston.
Observação: Alguns sistemas de formato pequeno como Intel® NUC não podem acomodar fisicamente a altura do dissipador de calor. Nessas circunstâncias, sugerimos o FURY Renegade sem o dissipador de calor (SFYRS/xxxG, SFYRD/xxxG).