ASUS - Pro WS W790E-SAGE SE Motherboard

configurator results memory

  • 标准

    0 GB (Removable)

  • 最大

    2 TB Reg ECC RDIMMs (512GB w/current Kingston parts)

  • 总线架构

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-3400/W-2400 Series Intel W790

重要配置说明

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF EIGHT for Octal Channel mode. Octal Channel mode is only supported on Xeon W-3400 series processors.
  • When using Xeon W-2400 series processors, memory sockets C1 D1 G1 H1 are disabled. Xeon W-2400 models support Quad Channel configurations only.
  • Mixing x4 and x8 modules is not allowed.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in Octal Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor limitations, Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • All 5600MT/s and 4800MT/s memory will safely clock down to slower speeds when forced by the chipset/processor.
  • Refer to motherboard manual and QVL for supported memory configurations and speeds.

Kingston Fury 配置说明

  • FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock on XMP supporting processor models.
  • Only Xeon W-2400 and W-3400 X-Series processor models support XMP overclock profiles. Non "X" series processors will support PnP overclocking.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

适用于您的系统的兼容升级产品

超频通过超越行业标准内存规格(速度、延迟、电压)实现更高性能。尽管超频通常是安全的并得到 Intel、AMD 和主板/系统制造商的支持,但超频风险自负。系统稳定性可能会受到部分速度和配置的负面影响。列出的 FURY 部件依据的是主板制造商测试 (QVL) 和金士顿内部测试,不过,部分系统可能需要高品质组件(高端的处理器型号、主板、电源和水冷散热)才能实现稳定的超频,尤其是对于极快运行速度而言。