Supermicro - SuperServer 5029C-TN2 (Super X11SCV-Q)
-
Bus Architecture
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
USB 2.0/3.x Type-C
SSD - M.2 NVMe
-
2 Socket(s)
-
Intel Celeron Intel Q370
Intel Core i3 8th Gen Intel Q370
Intel Core i5 8th Gen Intel Q370
Intel Core i7 8th Gen Intel Q370
Intel Pentium Intel Q370
SYS-5029C-TN2
Important Configuration Notes
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- Faster memory will clock down to run at optimal speed depending on processor model installed.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). A 64-bit Operating System is required to utilize more than 4GB of memory.
Compatible Upgrades For Your System
- ValueRAM
- Solid-State Drives
Filter
Filters
Applied
-
Part Number: KVR26S19S6/4
- Part Number: KVR26S19S6/4
- DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 8Gbit
-
Part Number: KVR26S19S6/8
- Part Number: KVR26S19S6/8
- DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 16Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX16 1.2V 260-pin 16Gbit
-
Part Number: KVR26S19S8/16
- Part Number: KVR26S19S8/16
- DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX8 1.2V 260-pin 16Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX8 1.2V 260-pin 16Gbit
-
Part Number: KVR26S19S8/8
- Part Number: KVR26S19S8/8
- DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX8 1.2V 260-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered SODIMM CL19 1RX8 1.2V 260-pin 8Gbit
Filter
Filters
Applied
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SEDC600ME/960G
- Part Number: SEDC600ME/960G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.