Supermicro - H13SSL-NT Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maximum

    3 TB

See memory upgrades

  • Bus Architecture

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    PCIe 4.0

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

See storage upgrades

  • 12 Socket(s)

  • AMD EPYC 9004/9005 Series

MBD-H13SSL-NT

  • Reg ECC RDIMMs:

    Configurations up to 1.5TB* can be reached using Kingston's 16, 32, 48, 64, 96, and 128GB modules IN GROUPS OF TWELVE. *Depending on CPU.

Important Configuration Notes

  • Only AMD EPYC 9005 series processors can use memory modules built with 32Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
  • MODULES MUST BE ORDERED AND INSTALLED IN GROUPS OF TWELVE FOR MAXIMUM MEMORY PERFORMANCE.
  • Mixing module types and densities (x4, x8, 16Gbit, 24Gbit, 32Gbit) is NOT allowed. All installed modules must be identical.
  • Kingston memory will clock down to run at optimal speed depending on processor model installed and number of modules installed. Please refer to system documentation.

Compatible Upgrades For Your System

Results
Speed{{Footnote.A65242}}
Module Capacity
Ranking
DRAM Width
DRAM Density
Filter Filters Applied
Sort by Part Number — A to Z

Kingston FURY Renegade with Heatsink (SFYRSK/xxxG, SFYRDK/xxxG) will fit in most systems that can accommodate its size (~80mm x 23.67mm x 10.5mm). This includes a variety of motherboards, desktops, gaming PCs and the PlayStation 5. If you are uncertain whether it will fit, please review your system manufacturer’s support manual, or contact Kingston Technical Support.
Note: Some small-form-factor systems like Intel® NUC cannot physically accommodate the height of the heatsink. In these circumstances, we suggest FURY Renegade without heatsink (SFYRS/xxxG, SFYRD/xxxG).

Results
Capacity Range
Form Factor
Interface
Filter Filters Applied
Sort by Part Number — A to Z
* Kits: warranty void and returns not accepted if sold or used separately.