HP/HPE - ProLiant DL580 G7 (Xeon E7)

-
Standard
16 GB (Removable)
32 GB (Removable)
-
Maximum
2 TB on Xeon E7
-
16GB Standard:
Memory Cartridge 1 (installed)
1A 4 GB3B 8A 4 GB6B -
Memory Cartridge 2 (installed)
1A 4 GB3B 8A 4 GB6B -
Memory Cartridge 3 (optional)
-
Memory Cartridge 4 (optional)
-
up to 8 Memory Cartridges (optional)
-
Bus Architecture
USB 2.0/3.x Type-A
SSD - SATA 2.5-inch 9.5mm
-
8 Socket(s) per Memory Cartridge
64 Socket(s) up to 8 Memory Cartridges
-
Intel Xeon E7 Series Intel 7500
584084-001; 584084-421; 584085-001; 584085-421; 584086-001; 584086-421; 584087-001; 584087-421; 588857-B21; 595241-001; 595241-421
-
Using Xeon E7 series processors
Virtually any configuration up to 2TB can be reached using Kingston's 4, 8, 16 and 32GB RDIMM modules IN GROUPS OF TWO or FOUR.
Important Configuration Notes
- VERIFY XEON PROCESSOR
- MODEL BEFORE ORDERING
- XEON 7500 SERIES
- NO LONGER SUPPORTED
- Low Voltage 1.35V PC3L DIMMs are only supported with Xeon E7 series processors and E7 Memory Cartridge, HP p/n 644172-B21. 32GB DIMMs require Xeon E7 series processors.
- Xeon E7 series processors and E7 Memory Cartridge support high density quad-rank 32GB (KTH-PL310QLV/32G), dual-rank 16GB (KTH-PL313LV/16G) and low density quad-rank 16GB (KTH-PL313QLV/16G) RDIMMs.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS in each Memory Cartridge.
- DIMM pairs MUST be populated in sequence by letter designation. Install DIMM pair in 1A/8A first, followed by 3B/6B, then 2C/7C and 4D/5D last.
- Maximum performance is achieved by balancing DIMM pairs by letter groupings across all Memory Cartridges. Such that the 1A/8A pair is installed in all Memory Cartridges first, followed by the B pair, C pair and D pair.
- Faster memory will clock down to run at optimal speed and voltage depending on processor model and number of modules installed.
Compatible Upgrades For Your System
- Solid-State Drives
-
Part Number: SEDC600ME/1920G
- Part Number: SEDC600ME/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more