ASUS - TS Server TS100-E9-PI4 (P10S-X)
-
Bus Architecture
PCI
USB 2.0/3.x Type-A
PCI Express
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
-
4 Socket(s)
-
Intel Xeon E3-1200 v5 Intel C232
-
Configurations up to 64GB can be reached using Kingston's 4, 8, and 16GB modules or kits.
Important Configuration Notes
- Faster memory will clock down to run at optimal speed depending on processor model installed.
- MODULES MUST BE ORDERED AND INSTALLED IN PAIRS for Dual Channel mode. Kingston offers "K2" kit part numbers for Dual Channel mode.
- If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.
- This system supports both ECC and non-ECC memory. Mixing ECC and non-ECC modules is not recommended.
Compatible Upgrades For Your System
- ValueRAM
- Server Premier
- Solid-State Drives
Filter
Filters
Applied
-
Part Number: KVR32N22S6/4
- Part Number: KVR32N22S6/4
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX16 1.2V 288-pin 8Gbit
-
Part Number: KVR32N22D8/16
- Part Number: KVR32N22D8/16
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 2RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR32N22S8/8
- Part Number: KVR32N22S8/8
- DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 3200MT/s Non-ECC Unbuffered DIMM CL22 1RX8 1.2V 288-pin 8Gbit
-
Part Number: KVR26N19S6/4
- Part Number: KVR26N19S6/4
- DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
- Spec Sheet PDF
DDR4 2666MT/s Non-ECC Unbuffered DIMM CL19 1RX16 1.2V 288-pin 8Gbit
Filter
Filters
Applied
Filter
Filters
Applied
-
Part Number: SEDC600ME/1920G
- Part Number: SEDC600ME/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s Read, 530MB/s Write
- Learn more
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for Data Center Environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- 560MB/s Read, 530MB/s Write
- Learn more
* Kits: warranty void and returns not accepted if sold or used separately.