Question 1

I am copying files to my flash memory and get an error message stating "The directory or file cannot be created". The total size of all files is less than the capacity of the card. Why?

Accepted Answer

This is a limitation of the FAT file system. In order to transfer more data to this card, you will need to remove the current data on the card and create folders on the card to copy files to. Once this is done, you should be able to transfer more data to the card. You can also reformat the card using FAT32 file system. But make sure the device you use the card with supports this file system.

FAQ: KFC-012611-GEN-03

Was this helpful?

Question 2

My flash card is not seen by my device or shows a card error in the device but it works OK in another device. Why?

Accepted Answer

There is a incompatibility between the card and the device. This can be due to the device not supporting the capacity of the card or the card uses a newer technology than the device is able to use. In some cases, there are updates to the device that allow it to read newer or larger cards. Please check with the device manufacturer or on our website to see what cards are supported with your device.

FAQ: KFC-012711-GEN-04

Was this helpful?

Question 3

I am being prompted for a password to access my flash card. What is the password?

Accepted Answer

Kingston does not distribute flash media with password protection. This password was either generated by a third party program or by a cell phone. To regain access, use the third party software or the Lock Code assigned to the cell phone.

FAQ: KFC-012611-GEN-06

Was this helpful?

Question 4

What operating systems support exFAT?

Accepted Answer

Operating System	exFAT support	Patch download
Windows 7	Supported natively
Windows Vista	Requires update to Service Pack 1 or 2 (both supports exFAT)	Download Service Pack 1 (with exFAT support) Download Service Pack 2 (with exFAT support)
Windows XP (Service Pack 2 or 3)	Requires exFAT patch update	Must have Service Pack 2 or 3 installed to use this update Download exFAT patch update
Mac OS X	Requires Mac OS X version 10.6.6 and above

KGF-022811-GEN-02

Question 5

What does the X rating for flash memory mean?

Accepted Answer

The X rating is a measurement of the performance of the card. It is determined by dividing the write speed of the card by 150KB/s*. To put it another way, you can determine the write speed of a card by multiplying its X rating by 150KB/s. For example:

50X = 50(multiplier) x 150KB/sec = 7.5 MB/sec

* 1 KB = 1,000 Bytes; 1 MB = 1 million Bytes.

FAQ: KFC-012611-GEN-05

Was this helpful?

50X = 50(multiplier) x 150KB/sec = 7.5 MB/sec

* 1 KB = 1,000 Bytes; 1 MB = 1 million Bytes.

Question 6

Can I boot from this Kingston flash card, set it as a fixed disk or run an OS from it?

Accepted Answer

No. We do not support our flash cards as bootable devices, fixed disks or something you can run an OS from.

Question 7

How do I format my flash card?

Accepted Answer

Warning: Formatting a flash card will erase all the files on the card. Most devices you use the flash card with will (i.e. camera) have a format feature. Before you use this feature, make sure that this size card and type is supported by the device. Also make sure that the format the device uses is compatible with any other device you might use it with (i.e. the camera formats in FAT32 but a digital frame can only read FAT).

If you are using a card reader and a PC to format the card, open "My Computer" in XP or "Computer" in Vista and Win7 and highlight the drive that corresponds to the card. Make sure you choose the correct drive letter. Then with the right mouse button, click on the drive. Then choose "Format" from the menu and click on it with your left mouse button.

Choose the file system that is appropriate for the card size and the device you are using it with. 2GB and below should use FAT. Above 2GB should use FAT32, NTFS or exFAT. NTFS and exFAT should only be used if you are copying files 4GB and larger to the card or the card is above 32GB.

If you are using a card reader and a Mac, open the "Go" menu and double-click on Utilities (If you do not see Utilities, double-click on Applications and then double-click on the Utilities folder). Double-click on the Disk Utility icon. On the Disk Utility Dialog box, click once on the flash card's active partition.Note: There will be two listings for the card, the first one is the active partition and the second is the volume label. Click the erase tab located on the right side of the screen. Using the Volume Format drop-down, select “MS-DOS File System” from the list. Click Erase.

Question 8

Flash memory cards are not being detected by the internal reader on my computer. Why?

Accepted Answer

Some systems do not support higher capacity cards (e.g., 1GB or 2GB). Many systems, including newer ones with built in card readers, are made to support cards up to a limited capacity. The capacity of your card may exceed this limitation and a firmware upgrade from the computer manufacturer may be necessary. Check with your computer manufacturer for hardware/software fixes.
If you have a digital camera or an external card reader that you know supports 2GB cards, try connecting one of these devices to the computer. If you can successfully view the card via the external device, the problem may exist with your built in reader.
If you have a SDHC (Secure Digital High Capacity) card, it is possible that the internal card reader on your computer does not support this technology. Although SDHC cards look identical to standard SD (Secure Digital) cards, SDHC cards are not backwards compatible with standard SD format host devices. Standard SD devices cannot read the format of SDHC cards. To ensure compatibility, look for the SDHC logo on cards and host devices (e.g., cameras, camcorders, etc.). If your device does not support SDHC cards, we suggest that you contact your place of purchase to exchange for the standard SD card. Note: Standard SD cards are not available in capacities larger than 2GB.
If you have Windows XP, Microsoft has acknowledged a Windows XP limitation with SDHC cards. Click the following link for the hotfix: http://support.microsoft.com/kb/934428.

Question 9

My flash card no longer works in my device or I can no longer view files saved to the card. Can the files on the card be recovered?

Accepted Answer

If you have data on your card that is important to you, we strongly recommend that you use one of the two possible ways for data recovery (see below). Kingston does not offer data recovery services. For more information on our warranty policy please visit http://www.kingston.com/company/warranty.asp

Contact a company that specializes in data recovery services such as Driver Savers at www.drivesavers.com and Ontrack at www.ontrack.com just to name a couple or you can do a search on Google for data recovery.
Go to www.download.com and do a search for data recovery and download one of the many utilities for data recovery which are fairly simple to use. We suggest trying one of the free versions as they work just as well as the paid versions. However for the possibilities for this option to work, the computer must assign a drive letter to the device. Even so it’s not a guarantee. If not then option #1 would be your best bet.

Question 10

While the MiniSD or MicroSD was in the adapter I enabled the write protection switch. I then removed the card from the adapter, and while I was using it I accidentally deleted some files. How is this possible if the unit was write protected?

Accepted Answer

The write protection switch on the adapter will only protect the MiniSD and MicroSD while it is in the adapter. Once you remove the MiniSD from the adapter, there is no longer any write protection available.

FAQ: KFC-012611-SDM-01

Was this helpful?

Mini SD - SDM - Technical Support

Frequently Asked Questions

Featured Questions

More Questions

Contact Technical Support

Email Technical Support

Call Technical Support