이 사이트는 향상된 특성 및 기능을 제공하기 위해 쿠키를 사용합니다. 본 사이트를 사용함으로써, 귀하는 이에 동의하는 것입니다. 당사는 귀하의 개인 정보와 데이터 보안을 소중히 여깁니다. 두 정책 모두 최근에 업데이트 되었으니 당사의 쿠키 정책개인 정보 보호 정책모두를 검토하십시오.

How To Install Memory

Desktop DIMM Installation

Note: Never apply pressure or handle the memory module on or around the Integrated Circuit (IC)! Always handle the memory with both hands positioned at the upper-most corners of the Printed Circuit Board (PCB).

1) Disconnect the AC power cord and remove the computer cover.

2) Prior to handling the memory module(s), always touch an unpainted and grounded metal object or use a grounded antistatic wrist strap to prevent electrostatic discharge (ESD).

3) If necessary, remove pre-existing memory by pressing down on the lock/ejector tabs. The tabs are located at both ends of the memory socket.

4) Align the memory module key(s) along with the memory socket keys(s) for proper installation.

5) Press the memory into the socket until the tabs snap into place and secure the memory module.

6) Replace the computer cover and plug in the AC power cord.

Notebook SO-DIMM Installation

Note: Never apply pressure or handle the memory module on or around the Integrated Circuit (IC)! Always handle the memory with both hands positioned at the upper-most corners of the Printed Circuit Board (PCB).

        Back To Top