MSI - Desktop Aegis R 12th

estándar

0 GB (Removable)
Máximo

128 GB

Actualizaciones de memoria compatibles

Arquitectura de bus

USB 2.0/3.x Type-A

SSD - SATA 2.5-inch 9.5mm

SSD - SATA 3.5-inch

USB 2.0/3.x Type-C

SSD - M.2 SATA

SSD M.2 NVME 2280 (double-sided)

Actualizaciones de Almacenamiento compatibles

4 Socket(s)

Intel Core i3 12th Gen Intel B660

Intel Core i5 12th Gen Intel B660

Intel Core i7 12th Gen Intel B660

Intel Core i9 12th Gen Intel B660

12TC-xxx; 12TE-xxx; 12TG-xxx

MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds.

If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation). Maximum configurations require a 64-bit operating system.

FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.

If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
Check with your motherboard QVL for the latest tested memory parts and supported configurations. Per MSI, overclocking is limited by the Ranks and number of DIMMs installed per channel.

Kingston FURY Memory
ValueRAM
Unidades de estado sólido

El Overclocking presiona las especificaciones de memoria estándar estables de la industria (velocidad, latencias, voltaje) para lograr un mayor rendimiento. Aunque generalmente es seguro y cuenta con el respaldo de Intel, AMD y los fabricantes de placas madre/sistemas, el Overclocking se realiza bajo su propio riesgo. La estabilidad del sistema puede verse comprometida por algunas velocidades y configuraciones. Las piezas FURY enumeradas se basan en las pruebas del fabricante de la placa madre (QVL) y las pruebas internas de Kingston. Sin embargo, algunos sistemas pueden requerir componentes premium (modelos de procesadores de gama alta, placas madre, fuentes de alimentación y enfriamiento por agua) para lograr un Overclocking estable, especialmente a velocidades extremas.