ASUS - Pro B760M-CT-CSM

configurator results memory

  • estándar

    0 GB (Removable)

  • Máximo

    128 GB

  • Arquitectura de bus

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    PCIe 4.0

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th/13th Gen Intel B760

    Intel Core i5 12th/13th/14th Gen Intel B760

    Intel Core i7 12th/13th/14th Gen Intel B760

    Intel Core i9 12th/13th/14th Gen Intel B760

Notas de configuración importantes

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • Faster memory will clock down to run at optimal speed depending on processor model and number of modules installed. Refer to motherboard manual and QVL for supported memory configurations and speeds.
  • Performance may increase with BIOS updates.

Notas de configuración de Kingston Fury

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable. An Intel 13th Gen or 14th Gen processor are required for K4 "Kit of 4" support.
  • Performance may increase with BIOS updates.

Actualizaciones compatibles para su sistema

El Overclocking presiona las especificaciones de memoria estándar estables de la industria (velocidad, latencias, voltaje) para lograr un mayor rendimiento. Aunque generalmente es seguro y cuenta con el respaldo de Intel, AMD y los fabricantes de placas madre/sistemas, el Overclocking se realiza bajo su propio riesgo. La estabilidad del sistema puede verse comprometida por algunas velocidades y configuraciones. Las piezas FURY enumeradas se basan en las pruebas del fabricante de la placa madre (QVL) y las pruebas internas de Kingston. Sin embargo, algunos sistemas pueden requerir componentes premium (modelos de procesadores de gama alta, placas madre, fuentes de alimentación y enfriamiento por agua) para lograr un Overclocking estable, especialmente a velocidades extremas.

Kingston FURY Renegade con disipador de calor (SFYRSK/xxxG, SFYRDK/xxxG) encajará en la mayoría de los sistemas que puedan adaptarse a su tamaño (~80mm x 23.67mm x 10.5mm). Esto incluye una variedad de placas base, computadoras de escritorio, PCs para juegos y PlayStation 5. Si no está seguro de si encajará, consulte el manual de soporte del fabricante de su sistema o comuníquese con el soporte técnico de Kingston.
Nota: Algunos sistemas de factor de forma pequeño como Intel® NUC no pueden adaptarse físicamente a la altura del disipador de calor. En estas circunstancias, sugerimos FURY Renegade sin disipador de calor (SFYRS/xxxG, SFYRD/xxxG).