HP/HPE - ProLiant XL190r Gen10 (G10)

-
Standard
8 GB (Removable)
-
Maximum
1 TB LRDIMMs
2 TB Reg ECC RDIMMs
-
Processor 1 (installed):
-
Processor 2 (installed):
-
Bus Architecture
USB 2.0/3.x Type-A
Flash - microSDHC
SSD - SATA 2.5-inch 9.5mm
SSD - SATA 3.5-inch
SSD - SATA 2.5-inch 7mm
SSD - M.2 SATA
-
8 Socket(s) per CPU
16 Socket(s) using two CPUs
-
Intel Xeon Scalable 1st/2nd Gen Intel C62x Series
867056-xxx
-
Reg ECC RDIMMs:
Configurations up to 1TB* can be reached using Kingston's 8, 16, 32, and 64GB modules IN GROUPS OF SIX. *Depending on CPU
-
LRDIMMs:
Configuration up to 2TB* can be reached using Kingston's 64 and 128GB modules IN GROUPS OF SIX. *Depending on CPU
Important Configuration Notes
- Only Intel Xeon x2xx Series (Cascade Lake-SP) processors can use memory modules built with 16Gb density DRAM. BIOS/firmware updates and/or specific board revisions may also be required.
- Memory will clock down to run at optimal speeds depending on processor model installed. See latest ProLiant QuickSpecs for processor models and supported memory speeds.
- This system supports Registered ECC (RDIMM) or Load Reduced (LRDIMM) memory. Mixing RDIMM and LRDIMM is not supported within this system.
Compatible Upgrades For Your System
- System-specific memory
- Solid-state drives
-
Part Number: SEDC600ME/1920G
- Part Number: SEDC600ME/1920G
- Designed for data center environments
- On-board power loss protection (PLP)
- Low latency and predictable IO
- Includes Acronis cloning software
- TCG Opal 2.0, AES 256-bit encryption
- 560MB/s read, 530MB/s write
- Learn more
-
Part Number: SEDC600M/1920G
- Part Number: SEDC600M/1920G
- Designed for data center environments
- On-board Power Loss Protection (PLP)
- Consistent latency and IOPS, reliable QoS
- Includes Acronis cloning software
- Up to 560MB/s read, 530MB/s write
- Learn more