support category card readers
MobileLite G4 (FCR-MLG4)

MobileLite G4 - Support

Frequently Asked Questions

Windows assigns new drive letters to the next available physical drive. It will sometimes take the same drive letter as a network drive for this reason. This is a common problem with removable storage devices. Please use the following procedure to resolve this problem.

  1. With the reader pluggedinto a USB port, right-click on “Computer” (or “My Computer”) located on yourdesktop or under the Start menu on the Task Bar and select “Manage”.
  2. Select Disk Management onthe left window pane.
  3. Locate the reader on theright window pane.
  4. Right-click on the driveand select “Change Drive Letter and Paths” and assign it a new drive letterthat is not being used by a mapped network drive.
  5. Go back to “Computer” andopen it to see if the reader is assigned the drive letter you chose.

FAQ: KFR-011411-GEN-01

Was this helpful?

This is due to a power limitation. Though some USB devices may work fine in these USB ports, USB 2.0 High Speed devices usually require more power. In order to resolve this issue, you will need to insert the reader directly into one of the main USB ports. These USB ports are usually located in the back of the tower.

FAQ: KFR-011411-GEN-02

Was this helpful?

This reader does support SDXC cards.Please note that most SDXC cards will use the exFAT file system.Most devices that accept SDXC cards, like digital cameras, read this file system.Therefore, you should make sure the operating system on your computer will support exFAT or can be updated to support exFAT.

FAQ: KFR-032312-MLG3-01

Was this helpful?

Still Need Assistance?

Chat With Support

Chat Now