Zauważyliśmy, że obecnie odwiedzasz witrynę w Wielkiej Brytanii. Czy zamiast tego chcesz odwiedzić naszą główną stronę?

ASRock - Z690 Steel Legend WiFi 6E/D5 Motherboard

configurator results memory

  • Standard

    0 GB (Removable)

  • Maksymalna liczba

    128 GB

  • Architektura magistrali

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2230 (double-sided)

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • Intel Core i3 12th Gen Intel Z690

    Intel Core i5 12th Gen Intel Z690

    Intel Core i7 12th Gen Intel Z690

    Intel Core i9 12th Gen Intel Z690

Ważne informacje dotyczące konfiguracji

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • JEDEC spec (ValueRAM) DIMMs will operate at 4800MT/s DDR5 installed in 1DPC (1 DIMM per Channel or 1x Dual Channel kit) configurations on Intel 12th Gen processors. Due to processor/chipset limitations DIMMs installed in 2DPC (2 DIMMs per Channel or 2x Dual Channel kits) are limited to operate at and will safely clock down to 4400MT/s or 4000MT/s. Refer to motherboard manual and QVL for supported memory configurations and speeds.

Kingston Fury – uwagi dotyczące konfiguracji

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • Per ASRock, with an Intel 13th Gen processor installed, the following overclocked memory speeds are supported:
  • 1DPC 1R Up to 6000+ MT/s (OC)
  • 1DPC 2R Up to 5600+ MT/s (OC)
  • 2DPC 1R Up to 4800+ MT/s (OC)
  • 2DPC 2R Up to 4800+ MT/s (OC)

Kompatybilne rozwiązania do modernizacji twojego systemu

Przetaktowanie wykracza poza stabilne standardowe specyfikacje pamięci (szybkość, opóźnienia, napięcie) w celu uzyskania wyższej wydajności. Chociaż ogólnie jest bezpieczne i wspierane przez rozwiązania firm Intel, AMD oraz producentów płyt głównych/systemów, przetaktowanie odbywa się na własne ryzyko użytkownika. Niektóre konfiguracje i ustawienia szybkości mogą być niekorzystne dla stabilności systemu. Podane numery części produktów FURY określono w oparciu o testy producentów płyt głównych (QVL) i wewnętrzne testy firmy Kingston, jednak niektóre systemy mogą wymagać najwyższej klasy komponentów (procesorów, płyt głównych, zasilaczy i systemów chłodzenia wodnego), aby uzyskać stabilne przetaktowanie, zwłaszcza przy ekstremalnych szybkościach.

Dysk Kingston FURY Renegade z radiatorem (SFYRSK/xxxG, SFYRDK/xxxG) pasuje do większości systemów, które mogą pomieścić nośnik pamięci o tych rozmiarach (~80mm x 23.67mm x 10.5mm). Dotyczy to różnych modeli płyt głównych, komputerów stacjonarnych, komputerów do gier oraz konsol PlayStation 5. W przypadku wątpliwości, czy dysk będzie pasować, należy zapoznać się z instrukcją obsługi dostarczoną przez producenta komputera lub konsoli, ewentualnie skontaktować się z działem pomocy technicznej firmy Kingston.
Uwaga: niektóre komputery o niewielkich rozmiarach, takie jak Intel® NUC, mogą nie być w stanie fizycznie pomieścić radiatora ze względu na jego wysokość. W takim przypadku zalecamy użycie dysku FURY Renegade bez radiatora (SFYRS/xxxG, SFYRD/xxxG).