ASUS - PRIME X670-P WIFI-CSM

configurator results memory

  • Standard

    0 MB (Removable)

  • Maksymalna liczba

    128 GB

  • Architektura magistrali

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 4 Socket(s)

  • AMD Ryzen 3 7000 Series AMD X670

    AMD Ryzen 5 7000 Series AMD X670

    AMD Ryzen 7 7000 Series AMD X670

    AMD Ryzen 9 7000 Series AMD X670

Ważne informacje dotyczące konfiguracji

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL PAIRS OR KITS for Dual Channel mode.
  • Memory will clock down to run at optimal speed depending number of modules and types installed per channel. Refer to motherboard manual and QVL for supported memory configurations and speeds. In configurations of 2DPC (2 DIMMs per Channel, 4 total DIMMs installed), standard JEDEC spec (ValueRAM) memory (non-EXPO) may clock down.

Kingston Fury – uwagi dotyczące konfiguracji

  • FURY Plug N Play memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • If a K4 "Kit of 4" part is not listed for a particular speed/capacity, it is not recommended to install two K2 "Kit of 2" parts together. K4 kits are only listed if the configuration has been tested as stable.
  • A BIOS update may be required to use 24GB and 48GB memory modules featuring 24Gbit DRAM.
  • Performance may increase with BIOS updates.
  • Kingston FURY Beast parts with AMD EXPO profiles also feature Intel XMP profiles for cross-platform compatibility.
  • Kingston FURY Beast and Renegade with Intel XMP profiles only feature Intel XMP profiles and require a BIOS that supports these to work on AMD chipsets.
  • This motherboard supports memory featuring both AMD EXPO and Intel XMP profiles. The Kingston FURY options listed have been verified compatible by the motherboard manufacturer.

Kompatybilne rozwiązania do modernizacji twojego systemu

Przetaktowanie wykracza poza stabilne standardowe specyfikacje pamięci (szybkość, opóźnienia, napięcie) w celu uzyskania wyższej wydajności. Chociaż ogólnie jest bezpieczne i wspierane przez rozwiązania firm Intel, AMD oraz producentów płyt głównych/systemów, przetaktowanie odbywa się na własne ryzyko użytkownika. Niektóre konfiguracje i ustawienia szybkości mogą być niekorzystne dla stabilności systemu. Podane numery części produktów FURY określono w oparciu o testy producentów płyt głównych (QVL) i wewnętrzne testy firmy Kingston, jednak niektóre systemy mogą wymagać najwyższej klasy komponentów (procesorów, płyt głównych, zasilaczy i systemów chłodzenia wodnego), aby uzyskać stabilne przetaktowanie, zwłaszcza przy ekstremalnych szybkościach.

Dysk Kingston FURY Renegade z radiatorem (SFYRSK/xxxG, SFYRDK/xxxG) pasuje do większości systemów, które mogą pomieścić nośnik pamięci o tych rozmiarach (~80mm x 23.67mm x 10.5mm). Dotyczy to różnych modeli płyt głównych, komputerów stacjonarnych, komputerów do gier oraz konsol PlayStation 5. W przypadku wątpliwości, czy dysk będzie pasować, należy zapoznać się z instrukcją obsługi dostarczoną przez producenta komputera lub konsoli, ewentualnie skontaktować się z działem pomocy technicznej firmy Kingston.
Uwaga: niektóre komputery o niewielkich rozmiarach, takie jak Intel® NUC, mogą nie być w stanie fizycznie pomieścić radiatora ze względu na jego wysokość. W takim przypadku zalecamy użycie dysku FURY Renegade bez radiatora (SFYRS/xxxG, SFYRD/xxxG).