เราสังเกตเห็นว่าคุณกําลังเยี่ยมชมเว็บไซต์ของสหราชอาณาจักร คุณต้องการเยี่ยมชมเว็บไซต์หลักของเราแทนหรือไม่?

ASUS - Pro WS W790E-SAGE SE Motherboard

configurator results memory

  • มาตรฐาน

    0 GB (Removable)

  • สูงสุด

    2 TB Reg ECC RDIMMs (512GB w/current Kingston parts)

  • สถาปัตยกรรมบัส

    USB 2.0/3.x Type-A

    SSD - SATA 2.5-inch 9.5mm

    USB 2.0/3.x Type-C

    SSD M.2 NVME 2242 (double-sided)

    SSD M.2 NVME 2260 (double-sided)

    SSD M.2 NVME 22110 (double-sided)

    SSD M.2 NVME 2280 (Heat Sink)

  • 8 Socket(s)

  • Intel Xeon W-3400/W-2400 Series Intel W790

หมายเหตุเกี่ยวกับโครงร่างการทำงานที่สำคัญ

  • MODULES MUST BE ORDERED AND INSTALLED IN IDENTICAL GROUPS OF EIGHT for Octal Channel mode. Octal Channel mode is only supported on Xeon W-3400 series processors.
  • When using Xeon W-2400 series processors, memory sockets C1 D1 G1 H1 are disabled. Xeon W-2400 models support Quad Channel configurations only.
  • Mixing x4 and x8 modules is not allowed.
  • JEDEC spec "KSM" Server Premier Registered DIMMs will operate at 4800MT/s installed in Octal Channel configuration using Intel Xeon W9, W7 and W5 series processors. Due to processor limitations, Xeon W3 series and W5-3423 / W5-3433 models limit memory speed to 4400MT/s, regardless of DIMM configuration.
  • All 5600MT/s and 4800MT/s memory will safely clock down to slower speeds when forced by the chipset/processor.
  • Refer to motherboard manual and QVL for supported memory configurations and speeds.

หมายเหตุในการกำหนดโครงร่างการทำงานสำหรับ Kingston Fury

  • FURY Plug N Play (automatic overclock) featured memory will run up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Speed, timings, and voltage are also programmed under Profile 1 which can be enabled from the BIOS to engage overclock on XMP supporting processor models.
  • Only Xeon W-2400 and W-3400 X-Series processor models support XMP overclock profiles. Non "X" series processors will support PnP overclocking.
  • Check with your motherboard QVL for the latest tested memory parts and supported configurations.
  • Mixing modules or kits of different speeds/timings/voltages is not recommended and may cause instability.
  • If a K8 "Kit of 8" part is not listed for a particular speed/capacity, it is not recommended to install two K4 "Kit of 4" together. K8 kits are only listed if the configuration has been tested as stable.

การอัพเกรดที่รองรับสำหรับเครื่องของคุณ

การโอเวอร์คล็อกเป็นการปรับการทำงานให้เกินกว่าค่าจำเพาะที่เสถียรตามมาตรฐานอุตสาหกรรมสำหรับหน่วยความจำ (ความเร็ว ค่าหน่วงเวลา แรงดันไฟฟ้า) เพื่อให้ได้ประสิทธิภาพในการทำงานที่สูงกว่า
 แม้ว่าโดยปกติจะทำได้อย่างปลอดภัยและรองรับโดยโปรเซสเซอร์ของ Intel, AMD รวมทั้งผู้ผลิตเมนบอร์ด/เครื่อง แต่คุณจะต้องแบกรับความเสี่ยงเองเมื่อทำการโอเวอร์คล็อก
 เสถียรภาพในการทำงานของระบบอาจได้รับผลกระทบจากความเร็วและการกำหนดค่าการทำงานบางอย่าง ชิ้นส่วนของ FURY ที่แจ้งอ้างอิงจากการทดสอบของผู้ผลิตเมนบอร์ด (QVLs) และผลการทดสอบภายในของ Kingston อย่างไรก็ตามเครื่องบางเครื่องอาจต้องใช้ส่วนประกอบระดับพรีเมี่ยม (รุ่นโปรเซสเซอร์ เมนบอร์ด ตัวจ่ายไฟหรือหล่อเย็นด้วยน้ำประสิทธิภาพสูง) เพื่อให้สามารถโอเวอร์คล็อกได้อย่างเสถียร โดยเฉพาะในความเร็วระดับสูงมาก ๆ