Kingston ValueRAM & Kingston FURY Beast DDR5 memory modules

DDR5 Memory Standard: An introduction to the next generation of DRAM module technology

Watch Video
Jan 2024
Blog Home

DDR5 Overview

DDR5 is the 5th generation of Double Data Rate Synchronous Dynamic Random Access Memory, aka DDR5 SDRAM. It began in 2017 by the industry standards body JEDEC (Joint Electron Device Engineering Council) with input from the leading global memory semiconductor and chipset architecture vendors, including Kingston, DDR5 is designed with new features for higher performance, lower power, and more robust data integrity for the next decade of computing. DDR5 debuted in 2021.

An illustration showing the anatomy of a DDR4 vs DDR5 memory module for comparison

Greater starting speed performance

DDR5 starts at 4800MT/s{{Footnote.A65242}}, while DDR4 tops out at 3200MT/s. This represents a 50% increase in bandwidth. In cadence with compute platform releases, DDR5 has planned standard speeds that will scale to 8800MT/s, possibly beyond.

Reduced Power / Increased Efficiency

At 1.1V, DDR5 consumes ~20% less power than DDR4 equivalent components at 1.2V. While conserving battery life in laptops, it also has a significant advantage for enterprise servers working around the clock.

PMIC

DDR5 modules feature on-board Power Management Integrate Circuits (PMIC), which help regulate the power required by the various components of the memory module (DRAM, Register, SPD hub, etc). For server class modules the PMIC uses 12V, and for PC class modules the PMIC uses 5V. This makes for better power distribution than previous generations, improves signal integrity, and reduces noise.

SPD Hub

DDR5 utilizes a new device integrating the Serial Presence Detect (SPD) EEPROM with additional hub features, managing access to the external controller and decoupling the memory load on the internal bus from external.

Dual 32-bit Subchannels

DDR5 splits the memory module into two independent 32-bit addressable subchannels to increase efficiency and lower the latencies of data accesses for the memory controller. The data width of the DDR5 module is still 64-bit, however breaking it down into two 32-bit addressable channels increases overall performance. For server class memory (RDIMMs), 8-bits are added to each subchannel for ECC support for a total of 40-bits per subchannel, or 80-bits per Rank. Dual Rank modules feature four 32-bit subchannels.

Module Key

The notch in the center of the module acts like a key, aligning with DDR5 sockets to prevent DDR4, DDR3, or other unsupported module types from being installed. Unlike DDR4, DDR5 module keys differ between module types: UDIMM and RDIMM.

On-Die ECC

On-Die ECC (Error Correction Code) is a new feature designed to correct bit errors within the DRAM chip. As DRAM chips increase in density through shrinking wafer lithography, potential for data leakage increases. On-Die ECC mitigates this risk by correcting errors within the chip, increasing reliability and reducing defect rates. This technology cannot correct errors outside of the chip or that occur on the bus between the module and memory controller housed within the CPU. ECC enabled processors for servers and workstations feature the coding that can correct single or multi-bit errors on the fly. Extra DRAM bits must be available to allow this correction to occur, featured on ECC class module types like ECC unbuffered, Registered, and Load Reduced.

Additional Temperature Sensors

Server-class DDR5 RDIMMs add temperature sensors to the ends of the modules to monitor thermal conditions across the length of the DIMM. This allows for more precise control of system cooling, as opposed to the throttling of performance seen in DDR4 for high temperatures.

Increased Banks and Burst Length

DDR5 doubles the banks from 16 to 32. This allows for more pages to be open at a time, increasing efficiency. Also doubled is the minimum burst length to 16, up from 8 for DDR4. This improves data bus efficiency, providing twice the data on the bus, and consequently reduces the number of reads/writes to access the same cache data line.

Improved Refreshes

DDR5 adds a new command called SAME-BANK Refresh, which allows a refresh of just one bank per bank group, versus all banks. When compared to DDR4, this command allows DDR5 to further improve on performance and efficiency.

Decision Feedback Equalization (DFE)

DDR5 utilizes Decision Feedback Equalization (DFE) to provide stable, reliable signal integrity on the module, required for high bandwidth.

Form Factors

While the memory modules themselves appear similar to DDR4, there are significant changes that make them incompatible with legacy systems. The key location (notch in the center) moves to prevent them from being installed into incompatible sockets.

  • ECC Registered DIMM (RDIMM)
  • Multiplexer Combined Ranks DIMM (MCRDIMM)
  • Multi-Ranked Buffered DIMM (MRDIMM)
  • ECC Unbuffered DIMM (ECC UDIMM)
  • ECC Unbuffered SODIMM (ECC SODIMM)
  • Non-ECC Unbuffered DIMM (UDIMM)
  • Non-ECC Unbuffered SODIMM (SODIMM)
  • Compression Attached Memory Module (CAMM)
DDR5 memory qualified by the world's leading motherboard manufacturers

Qualified by the world's leading motherboard manufacturers{{Footnote.N64682}}

Tested and approved so you can build and upgrade with confidence on your preferred motherboard.

Motherboard logos

Learn more

JEDEC Industry Standard Specifications

Data Rates (Speed in MT/s){{Footnote.A65242}} 3600, 4000, 4400, 4800, 5200, 5600, 6000, 6400, 6800, 7200, 7600, 8000, 8400, 8800
Monolithic DRAM Densities (Gbit) 8Gb, 16Gb, 24Gb, 32Gb, 48Gb, 64Gb
Package Type and Ballout (x4, x8 / x16) BGA, 3DS TSV (78, 82 / 102)
Interface
Voltage (VDD / VDDQ / VPP) 1.1 / 1.1 / 1.8 V
Internal VREF VREFDQ, VREFCA, VREFCS
Command/Address POD (Pseudo Open Drain)
Equalization DFE (Dynamic Feedback Equalization)
Burst Length BL16 / BC8 / BL32 (optional)
Core Architecture
Number of Banks 32 Banks (8 Bank Groups)
8 BG x 4 banks (16-64Gb x4/x8)
8 BG x 2 banks (8Gb x4/x8)

16 Banks (4 Bank Groups)
4 BG x 4 banks (16-64Gb x16)
4 BG x 2 banks (8Gb x16)
Page Size (x4 / x8 / x16) 1KB / 1KB / 2KB
Prefetch 16n
DCA (Duty Cycle Adjustment) DQS and DQ
Internal DQS Delay Monitoring DQS interval oscillator
ODECC (On-die ECC) 128b+8b SEC error check and scrub
CRC (Cyclic Redundancy Check) Read/Write
ODT (On-die Termination) DQ, DQS, DM, CA bus
MIR (“Mirror” pin) Yes
Bus Inversion Command/address inversion (CAI)
CA Training, CS Training CA training, CS training
Write Leveling Training Modes Improved
Read Training Patterns Dedicated MRs for user-defined serial, clock, and LFSR -generated training patterns
Mode registers Up to 256 x 8 bits
PRECHARGE Commands All bank, per bank, and same bank
REFRESH Commands All bank and same bank
Loopback Mode Yes
Learn more about DDR5 memory

DDR5 Resources